PHILIPS
913713031966
1 / 1
- Part Number
- 913713031966
- UPC
- 8711500999726
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
General Information
- Application Code
- III
- Type Version
- IDC
- Lamp Type
- TL-D/PL-L
- Number of Lamps
- 2 piece/unit
- Number of Products on MCB (16A Type B) (Nom)
- 12
- Automatic Restart
- Yes
Operating and Electrical
- Input Voltage
- 220 to 240 V
- Input Frequency
- 50 to 60 Hz
- Operating Frequency (Nom)
- 45 kHz
- Ignition Method
- Programmed Start
- Crestfactor (Max)
- 1.7
- Power Factor 100% Load (Nom)
- 0.99
- Ignition Time (Max)
- 0.9 s
- Mains Voltage Performance (AC)
- -8%-+6%
- Mains Voltage Safety (AC)
- -10%-+10%
- Earth Leakage Current (Nom)
- 0.5 mA
- Inrush Current Width
- 0.35 ms
- Constant Wattage Deviation
- -2%/+2%
- Ballast Factor (Nom)
- 0.95
- Power Factor (Nom)
- 0.99
- Power Losses (Nom)
- 5.5-6.1 W
- Inrush Current Peak (Max)
- 28 A
Wiring
- Connector Type Input Terminals
- WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
- Cable Capacity Output Wires Mutual (Nom)
- 200 pF
- Connector Type Output Terminals
- WAGO 251 universal connector [ Suitable for both automatic wiring (ALF and ADS) and manual wiring]
- Cable Length Hot Wiring
- 0.75 m
- Wire Striplength
- 8.0-9.0 mm
- Dual Fixture Master/Slave
- Not applicable [ Master/Slave oper. not applicable]
- Input Terminal Cross Section
- 0.50-1.00 mm²
- Output Terminal Cross Section
- 0.50-1.00 mm²
- Cable Capacity Output Wires to Earth (Nom)
- 200 pF
System characteristics
- Rated Ballast-Lamp Power
- 58 W
- Rated Lamp Power on TL-D
- 58 W
- System Power on TL-D
- 112.8W@58 W; 116.6W@70 W
- Lamp Power on TL-D
- 107.2W@58 W; 110.5W@70 W
- Power Loss on TL-D
- 5.5W@58 W; 6.1W@70 W
- System Power on PL-L
- 112.7W@55 W
- Lamp Power on PL-L
- 106.7W@55 W
- Power Loss on PL-L
- 6W@55 W
Temperature
- T-Ambient (Max)
- 60 °C
- T-Ambient (Min)
- -25 °C
- T-Storage (Max)
- 50 °C
- T-Storage (Min)
- -40 °C
- T-Case Lifetime (Nom)
- 80 °C
- T-Case Maximum (Max)
- 80 °C
- T-Ignition (Max)
- 60 °C
- T-Ignition (Min)
- -25 °C
Mechanical and Housing
- Housing
- L 280x30x28
Emergency Operation
- Nominal Light Output After 60 Seconds
- 100% of EBLF
- Battery Voltage Lamp Ignition
- 186-275 V
- Normal Operating Voltage (DC)
- 220-240 V
- Battery Voltage Lamp Operation
- 186-275
- Battery Voltage Guaranteed Operation
- 176-275 V
- Battery Voltage Guaranteed Ignition
- 186-275 V
- Emergency Ballast Lumen Factor (EBLF) (Nom)
- 0.7 %
- Nominal Light Output After 5 Seconds
- 50% of EBLF
Approval and Application
- Energy Efficiency Index
- A2 BAT
- IP Classification
- IP 20 [ Ingress Protection 20]
- EMI 9 kHz ... 30 MHz
- EN55015
- EMI 30 MHz ... 1000 MHz
- EN55022 level B
- Safety Standard
- IEC 61347-2-3
- Performance Standard
- IEC 60929
- Quality Standard
- ISO 9000:2000
- Environmental Standard
- ISO 14001
- Harmonic Current Emission Standard
- IEC 61000-3-2
- EMC Immunity Standard
- IEC 61547
- Vibration Standard
- IEC68-2-6 F c
- Bumps Standard
- IEC 68-2-29 Eb
- Humidity Standard
- EN 61347-2-3 clause 11
- Temperature Marking
- Yes
- Emergency Standard
- IEC 60598-2-22
- Hum And Noise Level
- < 30 dB(A)
Product Data
- Full product code
- 872790091172500
- Order product name
- HF-P 258 TL-D III 220-240V 50/60Hz IDC
- EAN/UPC - Product
- 8711500999726
- Order code
- 913713031966
- Numerator - Quantity Per Pack
- 1
- Numerator - Packs per outer box
- 12
- Material Nr. (12NC)
- 913713031966
- Net Weight (Piece)
- 0.231 kg
Dokumente
Data Sheet
HerunterladenAndere Kategorien
AktuatorenBlöckeKabel, Rohre & SchläucheKompressorenKontrolleKupplungen & FittingsZylinder & KolbenElektronikFilterHVACIndustrie-PCs & HMIsBeleuchtungLineartechnikMotorenStromversorgungLeistungsübertragungPumpen & VentileErneuerbare energieRobotikDichtungen, Ringe & VerbinderSensoren und MessgeräteWerkzeuge und ZubehörCNCSonstiges