Phoenix Contact
2904105
1 / 1
Beschreibung
16-channel relay module for Honeywell C300 output modules TDOB01 and TBOB11. On the controller side, the module is controlled on a 37-pos. basis via D-SUB. A screw connection is available (marking: 48...1) on the field side. Module width: 142 mm- Country of Origin
- DE
- Part Number
- 2904105
- Tariff Code
- 85369010
- EAN
- 4046356783637
- UPC
- 4046356783637
- ETIM
- Group Code : EG000024
- Group Description : PLC's
- Class Description : Interface module
- Class Code : EC002780
- Version : 7
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
Input data
- Nominal input voltage UN
- 24 V DC
- Input voltage range in reference to UN
- 0.9 - 1.1
- Typical input current at UN
- 9 mA
- Typical response time
- 5 ms
- Typical release time
- 7 ms
- Status display/channel
- Yellow LED
Supported controller
- Controller
- HONEYWELL Experion PKS C300/C-Series
- Suitable I/O card
- TDOB01 (non-redundant)
- Suitable I/O card
- TDOB11 (redundant)
Note
- Utilization restriction
- EMC: class A product, see manufacturer's declaration in the download area
Dimensions
- Width
- 142 mm
- Height
- 142.5 mm
- Depth
- 66 mm
Connection data 2
- Connection name
- Field level
- Connection method
- Screw connection
- Screw thread
- M3
- Number of connections
- 1
- Number of positions
- 50
- Conductor cross section solid
- 0.2 mm² - 4 mm²
- Conductor cross section flexible
- 0.2 mm² - 2.5 mm²
- Conductor cross section AWG
- 24 - 12
Connection data
- Connection name
- Controller level
- Connection method
- D-SUB pin strip
- Number of connections
- 1
- Number of positions
- 37
Output data
- Contact type
- 1 PDT
- Contact material
- AgSnO
- Maximum switching voltage
- 250 V AC/DC
- Minimum switching voltage
- 5 V (at 100 mA)
- Limiting continuous current
- 2 A (see derating curve)
- Min. switching current
- 100 mA
- Interrupting rating (ohmic load) max.
- 48 W (24 V DC)
- Interrupting rating (ohmic load) max.
- 20 W (48 V DC)
- Interrupting rating (ohmic load) max.
- 18 W (60 V DC)
- Interrupting rating (ohmic load) max.
- 23 W (110 V DC)
- Interrupting rating (ohmic load) max.
- 40 W (220 V DC)
- Interrupting rating (ohmic load) max.
- 500 VA (250 V AC)
Ambient conditions
- Ambient temperature (operation)
- -20 °C - 70 °C
- Ambient temperature (storage/transport)
- -20 °C - 70 °C
- Degree of protection
- IP00
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 50 years
- China RoHS
- For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
Standards and Regulations
- Standards/regulations
- DIN EN 50178
- Rated insulation voltage
- 260 V AC
- Rated surge voltage
- 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
- Insulation
- Basic insulation
- Pollution degree
- 2
- Overvoltage category
- III
