Schmersal
101173574
IFL 20-333-10/01-M20
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
Angebot mit Herstellervorlaufzeit
Lieferung:Auf Anfrage
Bester Preis:
Preisanfrage senden
Additional Information
- Part Number
- 101173574
- ETIM
- Group Code : EG000026
- Group Description : Sensors
- Class Description : Inductive proximity switch
- Class Code : EC002714
- Version : 7
Electrical data
- Rated supply frequency, minimum
- 45 Hz
- Rated supply frequency, maximum
- 65 Hz
- Operating current, minimum
- 10 mA
- Rated operating voltage
- 15 ... 250 VAC
- Operating current
- 500 mA
- Switching element
- NO contact or NC contact
- Protection circuit integrated
- inductive interference protection
- Switching frequency, approx.
- 10 Hz
Note
- Note (General)
- Programmable by repositioning the plug-in jumper at the terminal screws | By repositioning the switch 5 different actuating directions can be selected. The selected actuating direction can be marked with a sticker.
Mechanical data - Dimensions
- Length of sensor
- 112 mm
- Width of sensor
- 40 mm
- Height of sensor
- 40 mm
Ambient conditions - Insulation values
- Rated impulse withstand voltage U
- 4 kV
Electrical data - Digital Output
- Voltage drop U
- 4.5 V
- Current at Voltage drop U
- 0.2 A
- Design of control elements
- Two-wire
- Current leakage I
- 1 mA
General data - Features
- Integral system diagnostics, status
- Yes
- Number of cable wires
- 2
General data
- Standards
- DIN VDE 0660-208 | EN IEC 60947-5-2
- Housing construction form
- Block
- Installation conditions (mechanical)
- not flush
- Enclosure material
- Plastic
- Material of the housing cover
- Luran
- Gross weight
- 170 g
Ambient conditions
- Degree of protection
- IP65
- Ambient temperature
- -25 ... +70 °C
- Protection class
- II
Mechanical data - Connection technique
- Termination
- Screw terminals M20 x 1.5
- Cable section, maximum
- 2 x 1.5 mm²
Mechanical data - Switching distances according EN IEC 60947-5-3
- Nominal switching distance S
- 20 mm
Approvals - Standards
- Certificates
- CCC
Status indication
- Note (Integral System Diagnostics, status )
- yellow LED
Andere Kategorien
NanometerManometerDurchflussmesserSensorenBeschleunigungssensorenLichtwellenleiter-SensorenDetektorenUltraschallsensorenTemperatur- und FeuchtigkeitssensorenSchwingungssensorenFüllstandssensorenDrucksensorenNäherungssensorenInduktive SensorenBewegungssensorenMagnetische Sensoren GruppeOptische SensorenKapazitive SensorenFotoelektrische SensorenPositionssensorenEncoderAndere Sensoren und Zubehör