Schneider Electric
ATV340D15N4S
Variable speed drive, Altivar Machine ATV340, 15 kW Heavy Duty, 400 V, 3 phases, Sercos
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
Produktbedingungen:
Angebot mit Herstellervorlaufzeit
Lieferung:1 - 2 Viele Arbeitstage
Bester Preis:
Preisanfrage senden
Additional Information
- Part Number
- ATV340D15N4S
- UNSPSC
- 39122001
- Tariff Code
- 8504404000
Specifications
- Variant
- standard version
- Product Or Component Type
- variable speed drive
- Ip Degree Of Protection
- IP20
- Phase
- 3 phase
- Communication Port Protocol
- Sercos || Modbus serial
- Nominal Output Current
- 32.0 A
- Product Specific Application
- machine
- Maximum Horse Power Rating
- 25 hp normal duty || 20 hp heavy duty
- Supply Frequency
- 50...60 Hz +/- 5 %
- Range Of Product
- Altivar Machine ATV340
- Motor Power Kw
- 18.5 kW normal duty || 15 kW heavy duty
- [Us] Rated Supply Voltage
- 380...480 V - 15...10 %
- Mounting Mode
- cabinet mount
- Emc Filter
- class C3 EMC filter integrated
Complementary
- Prospective Line Isc
- 22 kA
- Power Dissipation In W
- natural convection 18 W 380 V 4 kHz heavy duty) || forced convection 346 W 380 V 4 kHz heavy duty) || natural convection 21 W 380 V 4 kHz normal duty) || forced convection 411 W 380 V 4 kHz normal duty)
- Line Current
- 37.4 A 380 V normal duty) || 30.2 A 480 V normal duty) || 44.9 A 380 V heavy duty) || 35.7 A 480 V heavy duty)
- Line Current
- 44.9 A 380 V without line choke heavy duty) || 35.7 A 480 V without line choke heavy duty) || 37.4 A 380 V with external line choke normal duty) || 30.2 A 480 V with external line choke normal duty) || 28.7 A 380 V with external line choke heavy duty) || 23 A 480 V with external line choke heavy duty)
- Analogue Output Type
- software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1 0...20 mA 500 Ohm 10 bits
- Discrete Output Type
- programmable output DQ1, DQ2 30 V DC 100 mA
- Electrical Connection
- screw terminal 0.2...2.5 mm² control || screw terminal 6...25 mm² line side || screw terminal 6...25 mm² DC bus || screw terminal 4...25 mm² motor
- Maximum Switching Current
- relay output R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2C resistive, cos phi = 1 5 A 250 V AC || relay output R2C resistive, cos phi = 1 5 A 30 V DC || relay output R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC
- Asynchronous Motor Control Profile
- variable torque standard || optimized torque mode || constant torque standard
- 4 Quadrant Operation Possible
- true
- Apparent Power
- 28.3 kVA 480 V normal duty) || 29.7 kVA 480 V heavy duty)
- Net Weight
- 9.5 kg
- Type Of Polarization
- no impedance
- Relay Output Type
- relay outputs R1A || relay outputs R1C 100000 cycles || relay outputs R2A || relay outputs R2C 100000 cycles
- Switching Frequency
- 2...16 kHz adjustable || 7...16 kHz with derating factor
- Maximum Transient Current
- 42.9 A 60 s normal duty) || 48 A 60 s heavy duty) || 52.7 A 2 s normal duty) || 58 A 2 s heavy duty)
- Analogue Input Number
- 2
- Motor Slip Compensation
- automatic whatever the load || adjustable || not available in permanent magnet motor law || can be suppressed
- Discrete Output Number
- 2.0
- Method Of Access
- slave Modbus RTU
- Number Of Addresses
- 1-247
- Discrete Input Number
- 5
- With Safety Function Safe Stop 1 (Ss1)
- true
- Width
- 180.0 mm
- Transmission Rate
- 4.8 kbit/s || 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
- Depth
- 249.0 mm
- Analogue Input Type
- AI1 software-configurable current 0...20 mA 250 Ohm 12 bits || AI1 software-configurable temperature probe or water level sensor || AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI2 software-configurable voltage - 10...10 V DC 31.5 kOhm 12 bits
- Electrical Connection
- control screw terminal 0.2...2.5 mm² AWG 24...AWG 12 || line side screw terminal 6...25 mm² AWG 8...AWG 3 || DC bus screw terminal 6...25 mm² AWG 8...AWG 3 || motor screw terminal 4...25 mm² AWG 10...AWG 3
- Maximum Output Frequency
- 0.599 kHz
- With Safety Function Safe Brake Management (Sbc/Sbt)
- true
- Height
- 385.0 mm
- Acceleration And Deceleration Ramps
- linear adjustable separately from 0.01...9999 s || S, U or customized
- Maximum Output Voltage
- 480 V
- Base Load Current At High Overload
- 32.0 A
- Transmission Frame
- RTU
- Relay Output Number
- 2
- With Safety Function Safe Torque Off (Sto)
- true
- Data Format
- 8 bits, configurable odd, even or no parity
- Base Load Current At Low Overload
- 39.0 A
- Connector Type
- 3 RJ45
- Pollution Degree
- 2 EN/IEC 61800-5-1
- Analogue Output Number
- 2
- Physical Interface
- 2-wire RS 485
- Minimum Switching Current
- relay output R1B 5 mA 24 V DC || relay output R2C 5 mA 24 V DC
- Discrete Input Logic
- 16 preset speeds
- Continuous Output Current
- 39 A 4 kHz normal duty || 32 A 4 kHz heavy duty
- Brake Chopper Integrated
- true
- Output Voltage
- <= power supply voltage
- Nominal Switching Frequency
- 4 kHz
- Braking To Standstill
- by DC injection
- Discrete Input Type
- PTI safe torque off 0-30 kHz, 24 V DC 30 V) || DI1...DI5 discrete input, 24 V DC 30 V)3.5 kOhm
- Protection Type
- thermal protection motor || safe torque off motor || motor phase loss motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent drive || output overcurrent between motor phase and earth drive || output overcurrent between motor phases drive || short-circuit between motor phase and earth drive || short-circuit between motor phases drive || motor phase loss drive || DC Bus overvoltage drive || line supply overvoltage drive || line supply undervoltage drive || input supply loss drive || exceeding limit speed drive || break on the control circuit drive
- With Safety Function Safely Limited Speed (Sls)
- true
- Synchronous Motor Control Profile
- reluctance motor || permanent magnet motor
Offer Sustainability
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Rohs Exemption Information
- Yes
- Environmental Disclosure
- ENVPEP1609006EN
- Sustainable Offer Status
- Green Premium product
- Pvc Free
- Yes
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Circularity Profile
- ENVEOLI1609006EN
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Environment
- Product Certifications
- UL || CSA || TÜV || EAC || CTick
- Maximum Deflection Under Vibratory Load (During Operation)
- 1.5 mm at 2...9 Hz
- Standards
- EN/IEC 61800-3 || EN/IEC 61800-5-1 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || UL 618000-5-1 || UL 508C
- Regulation Loop
- adjustable PID regulator
- Permitted Relative Humidity (During Operation)
- class 3K5 according to EN 60721-3
- Operating Altitude
- <= 9842.52 ft (3000 m) with current derating above 1000m
- Overvoltage Category
- class III
- Environmental Class (During Operation)
- class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
- Maximum Acceleration Under Shock Impact (During Operation)
- 70 m/s² at 22 ms
- Pollution Degree
- 2
- Electromagnetic Compatibility
- electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency immunity test level 3 IEC 61000-4-6
- Ambient Air Temperature For Operation
- -15-50 °C without derating vertical position) || 50-60 °C with derating factor vertical position)
- Volume Of Cooling Air
- 128.0 m3/h
- Marking
- CE
- Maximum Acceleration Under Vibrational Stress (During Operation)
- 5 m/s² at 9...200 Hz
- Noise Level
- 55.6 dB
- Ambient Air Temperature For Storage
- -25-70 °C
- Type Of Cooling
- forced convection
- Isolation
- between power and control terminals
- Assembly Style
- with heat sink
- Operating Position
- vertical +/- 10 degree
- Ambient Air Transport Temperature
- -40-70 °C