Schneider Electric
BRS397H360ABA
3-phase stepper motor - 2.26 Nm - shaft Ø 12mm - L=68mm - w/o brake - term box
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
Produktbedingungen:
Angebot mit Herstellervorlaufzeit
Lieferung:Auf Anfrage
Bester Preis:
€208.21
Additional Information
- Part Number
- BRS397H360ABA
- UNSPSC
- 26101205
- Tariff Code
- 8501512040
- Country of Origin
- DE
Environment
- Ambient Air Temperature For Operation
- -25-40 °C
- Standards
- IEC 50347 || IEC 60072-1
- Temperature Class
- F winding IEC 60034-1
- Vibration Resistance
- 20 m/s² maximum || A IEC 60034-14
- Ambient Air Temperature For Storage
- -25-70 °C
- Type Of Cooling
- natural convection
- Relative Humidity
- 15-85 % without condensation
- Ip Degree Of Protection
- total except shaft bushing IP56 IEC 60034-5 || shaft bushing without shaft seal ring IP41 IEC 60034-5
- Operating Altitude
- <= 3280.84 ft (1000 m) without power derating
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP111101EN
- Sustainable Offer Status
- Green Premium product
- Pvc Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Circularity Profile
- N/A
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Circle Diameter Of The Mounting Holes
- 98.99 mm
- Maximum Radial Force Fr
- 100 N first shaft end) || 50 N second shaft end)
- Nominal Torque
- 2 N.m
- Rotor Inertia
- 1.1 kg.cm²
- Centring Collar Depth
- 2 mm
- Holding Brake
- without
- Second Shaft
- without second shaft end
- Shaft Length
- 30 mm
- Net Weight
- 2.1 kg
- Resolution
- 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
- Angular Acceleration
- 200000 rad/s²
- Maximum Starting Frequency
- 5 kHz
- Time Constant
- 7 ms
- Number Of Mounting Holes
- 4
- Holding Torque
- 2.26 N.m
- Shaft Diameter
- 12 mm
- Mounting Holes Diameter
- 6.5 mm
- Service Life In Hours
- 20000 h bearing)
- Resistance
- 0.35 Ohm winding)
- Shaft End
- smooth shaft
- Electrical Connection
- terminal box
- Line Rated Current
- 5.8 A
- Accuracy Error
- +/- 6 arc min
- Maximum Axial Force Fa
- 175 N tensile force) || 30 N force pressure)
Specifications
- Maximum Mechanical Speed
- 3000 rpm
- Mounting Support
- flange
- Number Of Motor Poles
- 6
- Product Or Component Type
- motion control motor
- Length
- 111 mm
- Centring Collar Diameter
- 60 mm
- Motor Flange Size
- 85 mm
- Motor Type
- 3-phase stepper motor
- Supply Voltage Limits
- 34-34 V AC || 48-48 V DC
- Range Compatibility
- Lexium SD3
- Device Short Name
- BRS3