Schneider Electric
XX9D1A1F1M12
1 / 1
Beschreibung
Aktiv Reif
The XX range is an offer of sensors using the ultrasonic technology for the detection of any material, without contact. This product features a flat format, plastic case, 80mm x 80mm x 34mm, and an M12, 4-pin connector. Analogue output signal 0-10V, diffuse detection system. Its sensing distance is 1m, remotely remotely adjustable or by using external teach button.- Country of Origin
- US
- Part Number
- XX9D1A1F1M12
- Tariff Code
- 90318080
- EAN
- 3389119029964
- UNSPSC
- 39122230
Zahlungsmethoden:
- Bestes Angebot von:
Vertrauenswürdiger Automa.Net Lieferant- Verfügbarkeit:
- 1 Stk.Auf LagerAktualisiert am: 08-11-2024
- Garantie:
- 12 Monate
- Geschätzte Lieferung:
- Auf Anfrage
- Zustand:
- Neuer Überschuss
Neuer Überschuss - Ein neuer, unbenutzter, unbeschädigter Artikel ohne Herstellergarantie. Der Artikel kann ohne Originalverpackung oder in Ersatzverpackung geliefert werden. Wenn vorhanden, könnte die Verpackung geöffnet worden sein.
Sicherer Zahlungsprozess
Rückgabe- und Erstattungsrichtlinien
Versandrichtlinien
Garantiebedingungen
Specifications
- [Us] Rated Supply Voltage
- 15...24 V DC reverse polarity protection
- Type Of Output Signal
- analogue
- Range Of Product
- Telemecanique Ultrasonic sensors XX
- Sensor Name
- XX9
- [Sd] Sensing Range
- 0.1-1 m
- Material
- plastic
- Wiring Technique
- 4-wire
- Ip Degree Of Protection
- IP67 conforming to IEC 60529
- Series Name
- general purpose
- Beam Angle
- 7 °
- Detection System
- diffuse
- Sensor Type
- ultrasonic sensor
- Electrical Connection
- male connector M12 4 pins
- Sensor Design
- flat form 80 x 80 x 34
- [Sn] Nominal Sensing Distance
- 1-1 m adjustable with remote teach push-button
- Analogue Output Function
- 0...10 V
Contractual warranty
- Warranty
- 18 months
Complementary
- Maximum Switching Capacity
- 2 kOhm overload and short-circuit protection
- Repeat Accuracy
- 0.9 %
- Minimum Size Of Detected Object
- cylinder diameter 50.8 mm 1 m
- Maximum Delay Response
- 250 ms
- Status Led
- setting-up assistance 1 LED dual colour) || supply on 1 LED green) || output state 1 LED yellow)
- Setting-Up
- slope selection using teach button
- Transmission Frequency
- 180 kHz
- [Sa] Assured Operating Distance
- 0.1-1 m teach mode)
- Marking
- CE
- Blind Zone
- 0-100 mm
- Net Weight
- 0.3 kg
- Current Consumption
- 60 mA
- Deviation Angle From 90° Of Object To Be Detected
- -5-5 °
- Thread Type
- M30 x 1.5
- Maximum Delay Recovery
- 250 ms
- Maximum Delay First Up
- 1200 ms
- Supply Voltage Limits
- 10-28 V DC
- Enclosure Material
- valox
- Front Material
- epoxy
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP111234EN
- Sustainable Offer Status
- Green Premium product
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Circularity Profile
- ENVEOLI111225EN
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Environment
- Product Certifications
- UL || cCSAus
- Ambient Air Temperature For Operation
- 0-70 °C
- Resistance To Electromagnetic Fields
- 10 V/m level 3 IEC 61000-4-3
- Standards
- IEC 60947-5-2
- Vibration Resistance
- +/-1 mm 10-55 Hz)IEC 60068-2-6
- Shock Resistance
- 30 gn in all 3 axes 11 ms IEC 60068-2-27
- Ambient Air Temperature For Storage
- -40-80 °C
- Resistance To Electrostatic Discharge
- 8 kV level 4 IEC 61000-4-2
- Resistance To Fast Transients
- 1 kV level 3 IEC 61000-4-4
