Schneider Electric
ZBRRC
Programmable receiver, Harmony XB5R, 4 PNP, 2 buttons, 6 indicating LEDs, monostable, 24V DC
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
£146.91
1
Zahlungsmöglichkeiten:
Insgesamt 65 Parts In-Stock von 17 Distributors
Produktbedingungen:
Angebot mit Herstellervorlaufzeit
Lieferung:Auf Anfrage
Bester Preis:
€63.43
Additional Information
- Part Number
- ZBRRC
- UNSPSC
- 39122216
- Tariff Code
- 8517620090
- Country of Origin
- ID
Environment
- Product Certifications
- CCC || CSA || GOST || C-tick || UL
- Standards
- IEC 60947-5-1
- Electromagnetic Compatibility
- immunity for industrial environments conforming to IEC 61000-6-2 || conducted and radiated emissions class B conforming to CISPR 22 || electrostatic discharge immunity test - test level: 8 kV (in free air (in insulating parts)) conforming to IEC 61000-4-2 || electrostatic discharge immunity test - test level: 6 kV (on contact (on metal parts)) conforming to IEC 61000-4-2 || susceptibility to electromagnetic fields - test level: 10 V/m (80...2000 MHz) conforming to IEC 61000-4-3 || susceptibility to electromagnetic fields - test level: 3 V/m (80...2700 MHz, distance = 20 m) conforming to IEC 61000-4-3 || electrical fast transient/burst immunity test - test level: 2 kV (power supply wires) conforming to IEC 61000-4-4 || conducted RF disturbances - test level: 10 V conforming to IEC 61000-4-6 || radiated emission conforming to ETSI EN 300 440-1 || conducted emission conforming to EN 300-489-1 || conducted emission conforming to ETSI EN 300 489-3 || radiated emission conforming to ETSI EN 300 440-2 || electrical fast transient/burst immunity test - test level: 1 kV (PNP output wires) conforming to IEC 61000-4-4 || 1.2/50 µs shock waves immunity test - test level: 0.5 kV (differential mode) conforming to IEC 61000-4-5 || 1.2/50 µs shock waves immunity test - test level: 1 kV (common mode) conforming to IEC 61000-4-5 || immunity to microbreaks and voltage drops - test level: 7 ms conforming to IEC 61000-4-11
- Shock Resistance
- 10 gn 16 ms) 6000 shocks IEC 60068-2-27
- Marking
- CE
- Vibration Resistance
- +/- 7.5 mm 5-14 Hz)IEC 60068-2-6 || 2 gn 8-150 Hz)IEC 60068-2-6
- Insulation Resistance
- > 500 MOhm 500 V DC NF C 20-030
- Ip Degree Of Protection
- IP20 IEC 60529 casing) || IP20 terminals)
- Pollution Degree
- 2 IEC 60664-1
- Ambient Air Temperature For Storage
- -40-70 °C
- Overvoltage Category
- III IEC 60664-1
- Relative Humidity
- 90-90 % -20-55 °C, without condensation ETSI EN 300 440-1
- Radio Agreement
- RSS || SRRC || ANATEL || ARIB T66 || FCC || ICASA
- [Ui] Rated Insulation Voltage
- 60 V IEC 60664-1
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP101106EN
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Circularity Profile
- ENVEOLI1103010EN
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Electrical Connection
- 1 conductor cable 0.14-2.5 mm² - AWG 26...AWG 14 - solid - without cable end IEC 60947-1 || 2 conductors cable 0.14-1.5 mm² - AWG 26...AWG 16 - solid - without cable end IEC 60947-1 || 1 conductor cable 0.14-4 mm² - AWG 26...AWG 12 - flexible - with cable end IEC 60947-1 || 2 conductors cable 0.14-1.5 mm² - AWG 26...AWG 16 - flexible - with cable end IEC 60947-1
- [Us] Rated Supply Voltage
- 24 V DC - 15...20 %
- Height
- 108 mm
- Maximum Switching Current
- 0.2 mA DC
- Short-Circuit Protection
- 0.4 A fuse fast blow
- Modulation Technique
- O-QPSK
- [Uimp] Rated Impulse Withstand Voltage
- 0.8 kV
- Status Led
- 1 LED Green power ON || 1 LED green and yellow reception signal || 4 LEDs Green relay ON
- Output Contacts
- 4 PNP
- Communication Port Protocol
- Zigbee green power 2.4 GHz IEEE 802.15.4
- Maximum Voltage Drop
- <2 V DC 2 A
- Response Time
- < 30 ms after transmitter clicks
- Operating Position
- any position without derating
- Antenna Gain
- 0 dBi
- Utilisation Category
- DC-13 IEC 60947-5-1
- Net Weight
- 0.13 kg
- Time Delay Range
- 0.5 s - 15...15 %)
- Surge Withstand
- 0.5 kV differential mode IEC 61000-4-5 || 1 kV common mode IEC 61000-4-5
- Minimum Switching Current
- 10 mA 5 V DC
- Rated Short-Duration Power Frequency Withstand Voltage
- 1 kV 50 Hz IEC 60947-5-1
- Maximum Sensing Distance
- 100 m in free field || 25 m transmitter in a plastic box type XAL D and receiver in a metal enclosure || 40 m transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna
- Max Power Consumption In W
- 1 mW
- Number Of Channels
- 1
- Breaking Capacity
- 4.8 W per output)
- Mounting Support
- 35 mm symmetrical DIN rail conforming to IEC 60715 || mounting plate
- Housing Material
- self-extinguishing plastic
- Width
- 36 mm
- Output Type
- transistor PNP
- Depth
- 75 mm
- Tightening Torque
- 0.5-1 N.m IEC 60947-1
- Maximum Power Consumption In W
- 20 W DC
- Maximum Power Consumption In Va
- 20 VA DC
- Bandwidth
- 5-5 MHz
Specifications
- Antenna Type
- omnidirectional
- Range Of Product
- Harmony
- Transmission Frequency
- 2405 MHz
- Product Or Component Type
- programmable receiver
- Reset Time
- 2 ms time delay
- Level Or Class
- 5M00G7W
- Product Specific Application
- interface to PLC
- Function Of Module
- monostable
- Device Short Name
- ZBRRC
Dokumente
Data Sheet
HerunterladenCAD Models
traceparts
Herunterladen