Weidmuller
1175990000
ACT20M-CI-2CO-S
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
€189.18
1
Zahlungsmöglichkeiten:
Insgesamt 23 Parts In-Stock von 14 Distributors
Produktbedingungen:
Angebot mit Herstellervorlaufzeit
Lieferung:Auf Anfrage
Bester Preis:
€151.94
Additional Information
- Part Number
- 1175990000
General Data
- Accuracy
- < 0.05 % of measuring range
- Configuration
- none
- Galvanic isolation
- 3-way isolator
- Power consumption, max.
- 0.75 W
- Power consumption, typ.
- 0.53 W
- Rail
- TS 35
- Step response time
- ≤ 7 ms
- Temperature coefficient
- ≤ 0.01 % / °C
- Voltage supply
- 24 V DC ± 30 %
Probability Of Failure
- MTBF
- 219 Years
Approvals
- Approvals
- CE, CULUS, DETNORVER, DNV GL, EAC, FMEX, IECEXKEM, KEMAATEX
- ROHS
- Conform
- UL File Number Search
- E337701
Dimensions And Weights
- Width
- 6.1 mm
- Width (inches)
- 0.24 inch
- Height
- 112.5 mm
- Height (inches)
- 4.429 inch
- Depth
- 114.3 mm
- Depth (inches)
- 4.5 inch
- Net weight
- 83.6 g
Connection Data
- Type of connection
- Screw connection
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.6 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
- Wire connection cross section AWG, min.
- AWG 30
- Wire connection cross section AWG, max.
- AWG 14
Rated Data Ul
- UL certificate
- E337701.pdf
Tender Specification Sheets
- Long specification
- Standard signal splitter1-channel signal splitter in 6.1 mm width with external power supply,to transmit, isolate and split analogue DC current signals 0/4...20 mAAdd-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 2 x 0/4...20 mA Load resistance < 300 Ohm/ AusgangTransmission error < 0,05 % v. E. Limit frequency 100 Hz Auxiliary power 24 VDC +/- 30 %Power loss approx. 0.8 WAmbient temperature range -25 °C...+70 °C Isolation EN 61010-1, 3-way isolation up to 2.5 kV AC/DC of all circuits against each otherTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType ACT20M-CI-2CO-S
- Short specification
- Standard signal splitter1-channel signal splitter in 6.1 mm width with external power supply,to transmit, isolate and split analogue DC current signals 0/4 to 20 mA
Input
- Number of inputs
- 1
- Sensor
- Current source, Sensor with own supply, 4-wire sensor
- Input current
- 0...20 mA, 4…20mA
- Voltage drop, current input
- < 1.5 V
- Input resistance, current
- 70 Ω
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-20
- EClass 10.0
- 27-21-01-20
Output
- Number of outputs
- 2
- Output current
- 0...20 mA, 4...20 mA
- Cut-off frequency (-3 dB)
- 100 Hz
- Load impedance voltage
- ≥ 10 kΩ
- Load impedance current
- < 300 Ω, per channel, @ max 23mA
Product Information
- Product information
- The non-adjustable DC isolating amplifier ACT20M-CI-CO-S isolates analogue standard current signals. An analogue input current signal is linearly converted to an analogue output current signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring or the Weidmüller rail bus. The non-adjustable DC isolation amplifier ACT20M CI-2CO-S offers the same functionality, but has 2 galvanically isolated outputs (4-way isolation).
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Data For Ex Applications (Atex)
- Marking
- II 3 G Ex nA IIC T4 Gc
Insulation Coordination
- EMC standards
- IEC 61326-1, NE 21
- Galvanic isolation
- 3-way isolator
- Insulation voltage
- 2.5 kVeff /1 min.
- Pollution severity
- 2
- Rated voltage
- 300 Veff
- Surge voltage category
- II
Temperatures
- Humidity
- 95 %, no condensation
- Operating temperature, max.
- 70 °C
- Operating temperature, min.
- -25 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -25 °C...70 °C
- Ambient temperature
- -25 °C...+70 °C
- Storage temperature
- -40 °C...85 °C
Ratings Iecex/Atex/Cul
- Certificate No. (ATEX)
- KEMA10ATEX0183X
- Certificate No. (IECEX)
- IECEXKEM10.0090X
- Certificate no. (cULus)
- E337701
Ähnliche Produkte
Andere Kategorien
AktuatorenBlöckeKabel, Rohre & SchläucheKompressorenKontrolleKupplungen & FittingsZylinder & KolbenElektronikFilterHVACIndustrie-PCs & HMIsBeleuchtungLineartechnikMotorenStromversorgungLeistungsübertragungPumpen & VentileErneuerbare energieRobotikDichtungen, Ringe & VerbinderSensoren und MessgeräteWerkzeuge und ZubehörCNCSonstiges