Weidmuller
2001810000
PRO DCDC 240W 24V 10A
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
Insgesamt 14 Parts In-Stock von 11 Distributors
Produktbedingungen:
Additional Information
- Part Number
- 2001810000
General Data
- AC failure bridging time @ I
- > 12 ms @ 24 V DC
- Clip-in foot
- metal
- Current limiting
- 150% Iout
- Degree of efficiency
- Typ.: 92 %
- Housing version
- Metal, corrosion resistant
- Humidity
- 5...95 %, no condensation
- Max. perm. air humidity (operational)
- 5 %…95 % RH
- Mounting position, installation notice
- Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between., 50 mm clearance at top and bottom for free air circulation, mountable side by side without clearance
- Operating temperature
- -25 °C...70 °C
- Power loss, idling
- 2 W
- Power loss, nominal load
- 22 W
- Protection against over-heating
- Yes
- Protection against reverse voltages from the load
- 33…34 V DC
- Protection degree
- IP20
- Protective circuit
- Overtemperature, Short-circuit, Inverse voltage
- Short-circuit protection
- Yes
- Start-up
- ≥ -40 °C
- Surge voltage category
- III
Probability Of Failure
- MTBF
- 1,250,000 h
Signalling
- Contact load (NO contact)
- max. 30 V DC / 0.5 A
- Floating contact
- Yes
- Relay on/off
- Output voltage > 21.6 V / < 20.4 V
- Transistor output, positive-switching
- DC OK: 20 mA max., short-circuit-proof, I > 90%: 20 mA max., short-circuit-proof, Low UIN: 20 mA max., short-circuit-proof
Connection Data (Input)
- Conductor cross-section, AWG/kcmil , max.
- 12 AWG
- Conductor cross-section, AWG/kcmil , min.
- 30 AWG
- Conductor cross-section, flexible , min.
- 0.08 mm²
- Conductor cross-section, rigid , max.
- 4 mm²
- Conductor cross-section, rigid , min.
- 0.08 mm²
- Connection system
- Screw connection: pluggable
- Number of terminals
- 2 for (+, -)
- Reverse polarity protection
- Yes
- Tightening torque, max.
- 0.5 Nm
- Tightening torque, min.
- 0.4 Nm
- Wire connection cross section, flexible (input), max.
- 4 mm²
Approvals
- Approvals
- ABS, BURVER, CULUS, CULUSEX, DNV GL, LLOYDSREG, RINA
- ROHS
- Conform
- UL File Number Search
- E258476
Dimensions And Weights
- Width
- 43 mm
- Width (inches)
- 1.693 inch
- Height
- 130 mm
- Height (inches)
- 5.118 inch
- Depth
- 120 mm
- Depth (inches)
- 4.724 inch
- Net weight
- 1,110 g
Electrical Safety (Applied Standards)
- Electrical machine equipment
- Acc. to EN60204
- For use with electronic equipment
- Acc. to EN50178 / VDE0160
- Protection against dangerous shock currents
- Acc. to VDE0106-101
- Protective separation / protection against electrical shock
- VDE0100-410 / acc. to DIN57100-410
- Safety extra-low voltage
- SELV according to EN 60950, PELV according to EN 60204
- Safety transformers for switch-mode power supplies
- According to EN 61558-2-16
Emc / Shock / Vibration
- Limiting of mains voltage harmonic currents
- According to EN 61000-3-2
- Noise emission in accordance with EN55032
- Class B
- Vibration resistance IEC 60068-2-6
- 2.3 g (15 Hz…150 Hz)
- Interference immunity test acc. to
- EN 61000-4-2 (ESD), EN 61000-4-4 (burst), EN 61000-4-5 (surge), EN 61000-4-6 (conducted), EN61000-4-3 (HF field)
- Shock resistance IEC 60068-2-27
- 30 g in all directions
Input
- Connection system
- Screw connection: pluggable
- DC input voltage range
- 14...32 V (during operation), 18...32 V (commissioning)
- Input fuse (internal)
- Yes
- Inrush Current Limitation
- Yes
- Inrush current
- max. 15 A
- Rated input voltage
- 24 V DC
- Recommended back-up fuse
- 25 A, Char.B circuit breaker, 25 A, Char.C circuit breaker
Classifications
- ETIM 6.0
- EC002540
- ETIM 7.0
- EC002540
- EClass 9.0
- 27-04-07-01
- EClass 9.1
- 27-04-07-01
- EClass 10.0
- 27-04-07-01
Output
- DCL - peak load reserve
- 150 % (5 s); 200 % (200 ms); 300 % (100 ms); 400 % (50 ms); 600 % (20 ms)
- Capacitive load
- unrestricted
- Continous output current @ U
- 10 A @ 60 °C, 12 A @ 45°C, 7,5 A @ 70°C
- Output current
- 10A
- Output power
- 240 W
- Output voltage
- 22.5...29.5 V (adjustable via potentiometer on front)
- Overload protection
- Yes
- Parallel connection option
- yes, max. 5 (without diode module)
- Protection against inverse voltage
- Yes
- Ramp-up time
- ≤ 9 ms (Uout: 10%...90%)
- Rated output voltage
- 24 V DC ± 1 %
- Reserve capacity @ U
- 600% IN for 16 ms
- Residual ripple, breaking spikes
- max. 20 mVpp @ 24 VDC, IN
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
System Data
- Output current
- 10A
Insulation Coordination
- Humidity at operating temperature
- 5...95 %, no condensation
- Insulation voltage input / earth
- 1.5 kV
- Insulation voltage output / earth
- 0.5 kV
- Insulation voltage, input/output
- 1.5 kV
- Pollution severity
- 2
- Protection class
- III, with no ground connection, for SELV
- Surge voltage category
- III
Connection Data (Output)
- Conductor cross-section, AWG/kcmil , max.
- 14 AWG
- Conductor cross-section, AWG/kcmil , min.
- 24 AWG
- Conductor cross-section, flexible , max.
- 2.5 mm²
- Conductor cross-section, flexible , min.
- 0.2 mm²
- Conductor cross-section, rigid , max.
- 2.5 mm²
- Conductor cross-section, rigid , min.
- 0.2 mm²
- Number of terminals
- 10 (+ / - / signal)
- Tightening torque, max.
- 0.5 Nm
- Tightening torque, min.
- 0.4 Nm
Temperatures
- Humidity
- 5...95 %, no condensation
- Humidity at operating temperature
- 5...95 %, no condensation
- Operating temperature, max.
- 70 °C
- Operating temperature, min.
- -25 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -25 °C...70 °C
- Storage temperature
- -40 °C...85 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E258476