7760054306

ACT20P-VM-AO-S

7760054306

7760054306

7760054306

7760054306

Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
Wiederverkaufsrabatte bis zu 40%!

Preisanfrage senden

1

Zahlungsmöglichkeiten:

Fordern Sie ein Angebot an und wir senden Ihnen Informationen zu Verfügbarkeit und Preis.

Angebot mit Herstellervorlaufzeit

Lieferung:Auf Anfrage

Bester Preis:

€117.89

Additional Information

Part Number: 7760054306

General Data

Accuracy: 0.5 % FSR
Configuration: With FDT/DTM software
Galvanic isolation: 3-way isolator, between input ⁄ output ⁄ supply
Power consumption: ≤ 100 mA @ 24 VDC, ≤ 120mA @ 24V AC
Rail: TS 35
Step response time: < 300 ms
Temperature coefficient: ≤ 200 ppm/K
Voltage supply: 24…240 VUC (±10%)

Approvals

Approvals: CE, EAC
ROHS: Conform

Dimensions And Weights

Width: 22.5 mm
Width (inches): 0.886 inch
Height: 119.2 mm
Height (inches): 4.693 inch
Depth: 114.3 mm
Depth (inches): 4.5 inch
Net weight: 110 g

Connection Data

Type of connection: Screw connection
Tightening torque, min.: 0.4 Nm
Tightening torque, max.: 0.6 Nm
Clamping range, rated connection: 1.5 mm²
Clamping range, min.: 0.5 mm²
Clamping range, max.: 2.5 mm²
Wire connection cross section AWG, min.: AWG 26
Wire connection cross section AWG, max.: AWG 12

Input

Number of inputs: 1
Input signal: UDC, UACEffective value (sinusoidal only) 40-60 Hz
Input voltage: 0…30 V DC, 0…60 V DC, 0…150 V DC, 0…300 V DC, 0…440 V DC, 0…660 V DC, 0…60 V AC, 0…144 V AC, 0…300 V AC, 0…440 V AC
Input resistance: 1 MΩ±5%

Classifications

ETIM 6.0: EC002653
ETIM 7.0: EC002653
EClass 9.0: 27-21-01-20
EClass 9.1: 27-21-01-20
EClass 10.0: 27-21-01-20

Output

Number of outputs: 1
Output voltage, note: 0...10 V
Output current: 0(4)...20 mA
Load impedance voltage: ≥ 10 kΩ
Load impedance current: ≤ 500 Ω

Product Information

Product information: The analogue voltage converter ACT20P-VM-AO-S measures DC or AC voltages. The analogue input signal is linearly converted into an analogue output signal (current or voltage) and galvanically isolated. Features Configuration and monitoring are performed via FDT/DTM-Software „WI-Manager“. Signal and alarm triggering upon exceeding limit values or reverse polarity DC input voltage Front LED indicates operation status 3-way galvanic isolation between input, output and power supply.

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Insulation Coordination

EMC standards: IEC 61000-6 /-2, IEC 61000-6-4, IEC 61326-1
Galvanic isolation: 3-way isolator, between input ⁄ output ⁄ supply
Impulse withstand voltage: 4 kV (1.2 / 50 μs) input - output/ supply, 6 kV (input - output), 1.2/50 µs
Insulation voltage input or output/supply: 2.2 kVAC, 1 min, 50 Hz
Pollution severity: 2
Rated voltage: 300 VAC (supply-output), 500 VAC (supply-input; input-output)
Surge voltage category: III

Temperatures

Humidity: 5...95 %, no condensation
Operating temperature, max.: 65 °C
Operating temperature, min.: -25 °C
Storage temperature, max.: 85 °C
Storage temperature, min.: -40 °C
Operating temperature: -25 °C...65 °C
Storage temperature: -40 °C...85 °C

Ähnliche Produkte