Búsqueda de productos

Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, boring tool for changing the sleeve stops

Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 35 mm² ... 50 mm², lateral entry, WM crimp

Die, for CRIMPFOX-M, for coaxial connectors

Screw bit, hexagon, E6.3-1/4" drive, size: Hex 2 x 50 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173

Replacement sleeve feed, for the crimping device CF 3000-2,5

Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, pressing clamps for 0.5 mm² ... 2.5 mm² sleeves and 8 mm sleeve length

Replacement centering fork (bottom), for CF 3000-TOOLKIT 0,25

Stripping machine with integrated graphic display, for conductors and cables up to 6 mm in diameter, 230 V version

Die (pair), for CRIMPFOX-C120, for insulated ring cable lug 10 mm², oval crimp

Stripping tool, for stripping installation lines of √ò 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife

Stripping tool for coaxial cables of √ò 2.5 ... 7.6 mm, 2-level, strip-off dimensions 6.0 mm

Replacement sleeve feed, for CF 3000-TOOLKIT 0,25

Accessories for CF 1000-1,5 stripping and crimping device up to serial number 160591, sleeve stop for 0.25 mm² ... 0.34 mm² sleeves and sleeve length 8 mm

Replacement processing insert, for CF 3000-TOOLKIT 0,25, with adjustable blade

Pressing tool, Crimping tool for wire-end ferrules, 0.5mm², 4mm², Trapezoidal crimp

Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp

This FDM121 is an Ethernet switchboard display module and it is part of EnerlinX communication system. This display unit is compatible with Masterpact, Compact and PowerPact circuit breakers. FDM121 displays the measurements, alarms, and operating assistance data from one circuit breaker over ULP. Its LCD screen offers a high resolution with white backlighting. The FDM121 is equipped with a 24VDC terminal block and two RJ45 sockets for ULP connection. It is easily installed in a switchboard, either through a standard door cut-out (92x92mm) or two 22mm diameter holes. It is a 96 x 96 x 30 mm screen requiring 10 mm behind the door (or 20 mm when the 24 V power supply connector is used) The operating temperature range is between -10°C to 55°C, and the protection degree is IP54 on the front face. The FDM121 display module is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The FDM121 firmware can be updated using EcoStruxure Power Commission software.

Die, for CRIMPFOX-M, for coaxial connectors