Ricerca prodotti

SENTRON PAC3xxx/4xxx DIN rail adapter

Sealing plug for push-pull panel mounting frame, data (VS-PPC-F1...), IP54 degree of protection

Strain relief, type: B6 - B24

Protective cover, IP67, metal version, to cover the contact insert in the RJ45 and SC-RJ push-pull panel mounting frames

Industrial box for Spacial SBM. Multi purpose. 150 x 400 x 120 mm. Flat face box. Wall mounted on enclosure. Single piece body folded and welded. Cover fixing with half turn metal srew. Cover by 4 captive screw PZ2 outside sealed area. Made sheet of stee with polyester powder finish. Protection IP 66, IK10.

TeSys Deca electronic timer module for LC1D09-D38, LC1D40A-D80A, LC1D80-D150 (3P) contactors. To be used with 24-250V AC control circuit voltages, it provides a manual ajustable on-delay time 1.5 to 30 sec. The time delay period is signalling by LED. Mounting on contactors LC1D09-D38 using adapter LAD4BB, on contactors LC1D40A-D80A using adpater LAD4BB3, on contactors LC1D80-D150 (3P) directly on coil terminals. Multi standards certified (IEC, UL, CSA), it conforms to RoHS/REACh regulation.

TeSys D set of contacts, for 3-pole contactors LC1D115. For replacement of main contacts. It conforms to RoHS/REACh regulation.

Thalassa PLM wall-mounting polyester enclosure monobloc. 530 x 430 x 200 mm. Built-in canopy, one piece moulded with notches in the rear. Without mounting plate. 2 locks (3 mm double-bar lock). Polyester reinforced with fibreglass. Grey RAL 7035. IP66, IK10, NEMA (13,4X) 960°C fire resistance.

The WRH-F holder needs to be mounted on an overload relay. In combination with WRB bowden wire, the holder is used to reset TF and EF overload relays.

TeSys D replacement coil 230V AC 50/60Hz, for TeSys D contactors. To be used with 3 and 4-pole contactors LC1 D09 to D38 and LC1 DT20 to DT40. It operates in the voltage limits 0.8-1.1 Uc (50Hz), 0.85-1.1 Uc (60Hz) and environments until 60°C Green Premium compliant (RoHS/REACh).

HIM, Full Numeric Keypad, LCD Display, Drive Cover Mounted Or Handheld, Use With Powerflex 70-700-700H-700S-700L-750-753-Powerflex DC

TeSys U reversing module for side mounting, for the constitution of TeSys U reversing starter controllers. It provides reverse power contacts, coil control with interlocking capabilities to be supplied with 24 DC. To be used with an advanced power base LUB120, LUB320, or LUB380 equipped with a Control Unit LUC*BL type. To be associated with an assembling connector LU9MR1 and a control terminal block LU9M1 to complete the side mounting. Green Premium compliant (RoHS/REACh).

This Magelis XBTZ is an adaptor for Magelis terminal. It can be used with the connection cable depending on the application concerned. It is equipped with one 25-way SUB-D connector and one 9-way SUB-D connector, RS 485 on XBT terminal and 0.2 meter cable. It can be used to connect a controller to the XBTGT terminal.

LINER,D-TYPE,FOR DIAZED SCREW CAP SIZE DIII/63A, THREAD E33 D-TYPE LINER

This Harmony XAPA1120 is an empty control station plastic 2 horizontal openings. It is part of the range Harmony XAP, XB2 SL metal enclosures, for Harmony XB4.