Panasonic
PT-RQ13K
PT-RQ13KU 3-Chip DLP™ 4K+ Large Venue Laser Projector
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Additional Information
- Part Number
- PT-RQ13K
Specifications
- Brightness
- 10,000 lumens
- Resolution
- 5,120 x 3,200 pixels (Quad Pixel Drive - ON)
- Lamp
- 3-Chip DLP Laser
- Power supply
- AC 100-240 V, 50/60 Hz
- Power consumption
- 1,270 W (0.3 W with STANDBY MODE set to ECO. 4 W with
- DLP™ chip | Panel size
- 22.9 mm (0.9 inches) diagonal (16 -10 aspect ratio)
- DLP™ chip | Display method
- DLP™ chip x 3 (R, G, B), DLP™ projection system
- DLP™ chip | Pixels
- 4,096,000 (2,560 x 1,600) x 3, total of 12,288,000 pixels
- Refresh Rate
- 240 Hz
- LENS
- Optional powered zoom/focus lenses
- Light source
- Laser Diode (Laser class - Class 1)*Class 3R for North America.
- Screen size
- 1.78-25.4 m (70-1,000 inches) (16 -10 aspect ratio)
- Center-to-corner uniformity
- 90%
- Contrast
- 20,000 -1 (full on/full off, in Dynamic Contrast 3 mode)
- Scanning frequency | SDI
- SD-SDI signal SMPTE ST 259 compliant (YCBCR 4 -2 -2 10-bit) - 480i, 576i
- Keystone correction range
- Vertical - ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal - ±15° (0° with the ET-D75LE90)
- Optical axis shift | Vertical
- ±59% (±44% with the ET-D75LE6), (+74-84% with the ET-D75LE90),
- Optical axis shift | Horizontal
- ±29% (±19% with the ET-D75LE6), (-12-16% with the ET-D75LE90),
- Installation
- Ceiling/floor, front/rear
- Terminals | SDI IN 1
- BNC x 1,
- Terminals | SDI IN 2
- BNC x 1,
- Terminals | SDI IN 3
- BNC x 1,
- Terminals | SDI IN 4
- BNC x 1,
- Terminals | Frame Sync IN/OUT
- BNC x 1, (frame-synchronizing timing signal)
- Terminals | Frame Sync OUT
- BNC x 1, (frame-synchronizing timing signal)
- Terminals | SERIAL IN
- D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals | SERIAL OUT
- D-sub 9-pin (male) x 1 for link control
- Terminals | Remoter 1 In/Out
- M3 x 1 for link control (for wired remote control)
- Terminals | REMOTE 2 IN
- D-sub 9-pin (female) x 1 for external control (parallel)
- Terminals | DIGITAL LINK/LAN
- RJ-45 x 1 (for network, DIGITAL LINK connection (HDBaseT™ compatible),
- Terminals | Expansion Slot
- x 2 (SLOT 1,SLOT 2), SLOT NX (Compatible with Optional Board)
- Power cord length
- 3.0 m (9 ft 10 in)
- Cabinet materials
- Molded plastic
- Dimensions (W x H x D)
- 578 x 323.5 x 740 mm
- Weight
- 49 kg (108.0 lbs) (without lens)
- Operating noise
- 46 dB
- Operating temperature
- Ambient operating temperature - 0°C to 45°C (32 °F to 113 °F).
- Applicable software
- Logo Transfer Software, Multi Monitoring & Control Software,
- Technology
- 3-chip DLP Laser
Documenti
Data Sheet
ScaricareAltre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro