Filtry
SIMATIC hmi connecting cable for ktpx00(f) mobile, lengtth 5 meter
SIMATIC hmi connecting cable for ktpx00(f) mobile, lengtth 5 meter
Protective film 12; front Type 5. glues over the full area reflection shield matte Further information. quantity and content: See technical data
Protective film 12; front Type 5. glues over the full area reflection shield matte Further information. quantity and content: See technical data
Acc.FRAME TERMINAL BLOCK 3RT1955-4G-F. 3RT1054, 3RB105
Acc.FRAME TERMINAL BLOCK 3RT1955-4G-F. 3RT1054, 3RB105
Thalassa PLS box polyester rear with transparent PC cover. 270 x 540 x 180 mm. Insulating modular box. One piece moulded body. Wall mounted. High transparent cover, cover locking screw removable. Polyester reinforced with fibreglass rear, polycarbonate cover. Grey RAL 7035. IP65, IK09, NEMA (13,4X) 960°C fire resistance. Insulation Class II.
Thalassa PLS box polyester rear with transparent PC cover. 270 x 540 x 180 mm. Insulating modular box. One piece moulded body. Wall mounted. High transparent cover, cover locking screw removable. Polyester reinforced with fibreglass rear, polycarbonate cover. Grey RAL 7035. IP65, IK09, NEMA (13,4X) 960°C fire resistance. Insulation Class II.
DIN rail mounting frame, type: B24, for contact inserts, Top frame
DIN rail mounting frame, type: B24, for contact inserts, Top frame
This Magelis XBTZ is a protection accessory for Magelis terminal. It consists in 5 pell-off, disposable, dirt-resistant sheets dedicated to the protection of the terminal display. It is compatible with the Magelis XBTGC2xx0 and XBTGT2x30 panels.
This Magelis XBTZ is a protection accessory for Magelis terminal. It consists in 5 pell-off, disposable, dirt-resistant sheets dedicated to the protection of the terminal display. It is compatible with the Magelis XBTGC2xx0 and XBTGT2x30 panels.
This FDM121 is an Ethernet switchboard display module and it is part of EnerlinX communication system. This display unit is compatible with Masterpact, Compact and PowerPact circuit breakers. FDM121 displays the measurements, alarms, and operating assistance data from one circuit breaker over ULP. Its LCD screen offers a high resolution with white backlighting. The FDM121 is equipped with a 24VDC terminal block and two RJ45 sockets for ULP connection. It is easily installed in a switchboard, either through a standard door cut-out (92x92mm) or two 22mm diameter holes. It is a 96 x 96 x 30 mm screen requiring 10 mm behind the door (or 20 mm when the 24 V power supply connector is used) The operating temperature range is between -10°C to 55°C, and the protection degree is IP54 on the front face. The FDM121 display module is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The FDM121 firmware can be updated using EcoStruxure Power Commission software.
This FDM121 is an Ethernet switchboard display module and it is part of EnerlinX communication system. This display unit is compatible with Masterpact, Compact and PowerPact circuit breakers. FDM121 displays the measurements, alarms, and operating assistance data from one circuit breaker over ULP. Its LCD screen offers a high resolution with white backlighting. The FDM121 is equipped with a 24VDC terminal block and two RJ45 sockets for ULP connection. It is easily installed in a switchboard, either through a standard door cut-out (92x92mm) or two 22mm diameter holes. It is a 96 x 96 x 30 mm screen requiring 10 mm behind the door (or 20 mm when the 24 V power supply connector is used) The operating temperature range is between -10°C to 55°C, and the protection degree is IP54 on the front face. The FDM121 display module is entirely part of the EcoStruxure Power architecture and Ethernet ready smart panels. The FDM121 firmware can be updated using EcoStruxure Power Commission software.
Die, for CRIMPFOX-M, for coaxial connectors
Die, for CRIMPFOX-M, for coaxial connectors
Thalassa TBS industrial ABS box with opaque cover H20. Int is 150 x 105 x 80 mm. Ext is 164 x 121 x 87 mm. Wall mounted enclosure. Low plain cover. Outside sealed is flat screwdriver captive screw lock. Certifications is DEMKO, SEMKO, TÜV. Fire resistance 650°. ABS (acrylonitrile butadiene-styrene). IP66 (NEMA 4.4X), IK07, Grey RAL 7035, Insulation Class II. Set of 2. Ambient temperature for storage/operation is (-15 to 40°C)/(-25 to 60°C).
Thalassa TBS industrial ABS box with opaque cover H20. Int is 150 x 105 x 80 mm. Ext is 164 x 121 x 87 mm. Wall mounted enclosure. Low plain cover. Outside sealed is flat screwdriver captive screw lock. Certifications is DEMKO, SEMKO, TÜV. Fire resistance 650°. ABS (acrylonitrile butadiene-styrene). IP66 (NEMA 4.4X), IK07, Grey RAL 7035, Insulation Class II. Set of 2. Ambient temperature for storage/operation is (-15 to 40°C)/(-25 to 60°C).
SERVICE PACKAGE F. MOBILE PANEL 277(F) IWLAN V2 2 X CHARGING STATION CAP L/R, 1 X CONECTOR CHARGING STATION, 2 X TIGHT CORNER L/R, 2 X GASKET TIGHT CORNER, 4 X DECOR FILM L/R, 1 X BATTERY SLOT CAP W. GASKET, 1 X SPARE KEY FOR MLFBS 6AV6645-0..01-0AX1 AND 6AV6671-5CE00-0AX1 ATTENTION! NOT USABLE FOR V1 COMPONENTS!
SERVICE PACKAGE F. MOBILE PANEL 277(F) IWLAN V2 2 X CHARGING STATION CAP L/R, 1 X CONECTOR CHARGING STATION, 2 X TIGHT CORNER L/R, 2 X GASKET TIGHT CORNER, 4 X DECOR FILM L/R, 1 X BATTERY SLOT CAP W. GASKET, 1 X SPARE KEY FOR MLFBS 6AV6645-0..01-0AX1 AND 6AV6671-5CE00-0AX1 ATTENTION! NOT USABLE FOR V1 COMPONENTS!
Spacial SM Mounting rail screw AM1 + Options. M6 ISO thread. Head mounting is M6 x 12mm length. Asymmetrical DZ5-MB rail, Combination AM1-ED rail, Omega AM1-DE and AM1-DP rail, Notched AM1-EC rail. Slotted hexagonal head shape. set of 100.
Spacial SM Mounting rail screw AM1 + Options. M6 ISO thread. Head mounting is M6 x 12mm length. Asymmetrical DZ5-MB rail, Combination AM1-ED rail, Omega AM1-DE and AM1-DP rail, Notched AM1-EC rail. Slotted hexagonal head shape. set of 100.
TeSys D suppressor module, for LC1D09-D38, LC1DT20-DT40 contactors and CAD control relays. To be used with 110-250V AC control circuit voltage, it provides a RC protection limiting the transient voltage to 3 Uc max. Clip-on side mounting, overall size of the contactor is unchanged. Green Premium compliant (RoHS/REACh).
TeSys D suppressor module, for LC1D09-D38, LC1DT20-DT40 contactors and CAD control relays. To be used with 110-250V AC control circuit voltage, it provides a RC protection limiting the transient voltage to 3 Uc max. Clip-on side mounting, overall size of the contactor is unchanged. Green Premium compliant (RoHS/REACh).
This yellow empty pendant station for control or power circuits is designed for general purpose applications. Its design makes it simple and intuitive, but also very comfortable for the operator to use. It comprises a glass reinforced polyester enclosure with 2 vertical openings diameter 22mm and operator cut-out centres 40 mm. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. This robust pendant control station complies with the safety requirements of IEC standards.
This yellow empty pendant station for control or power circuits is designed for general purpose applications. Its design makes it simple and intuitive, but also very comfortable for the operator to use. It comprises a glass reinforced polyester enclosure with 2 vertical openings diameter 22mm and operator cut-out centres 40 mm. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. This robust pendant control station complies with the safety requirements of IEC standards.
Control cabinet key, metal, for all common types of control cabinet
Control cabinet key, metal, for all common types of control cabinet
Cable duct cutter, for cutting plastic cable ducts, covers, and profiles, 45° limit stop also for bevel cuts, 75 mm cutting length
Cable duct cutter, for cutting plastic cable ducts, covers, and profiles, 45° limit stop also for bevel cuts, 75 mm cutting length
Shield connection for two shielded cables on female contact carriers, without loose crimp contacts
Shield connection for two shielded cables on female contact carriers, without loose crimp contacts
Sleeve receiver for CF 500 crimping machine, for (SCM...) 1.5 - 6 mm flat plug, width: 6.3 mm
Sleeve receiver for CF 500 crimping machine, for (SCM...) 1.5 - 6 mm flat plug, width: 6.3 mm