Filtry
Spacial SM fixed tray for enclosure of W is 800 x D is 500 mm. Tray dimensions are H is 30 x W is 682 x D is 390 mm. Maximum Load 150 kg.
Spacial SM fixed tray for enclosure of W is 800 x D is 500 mm. Tray dimensions are H is 30 x W is 682 x D is 390 mm. Maximum Load 150 kg.
ACC_SWITCH 3RT2926-1CC00-Suppressor, RC Element 48-127VAC,S0
ACC_SWITCH 3RT2926-1CC00-Suppressor, RC Element 48-127VAC,S0
DEUTSCH removal tools simplify contact removal in connectors that utilize a round shoulder contact retention system.
DEUTSCH removal tools simplify contact removal in connectors that utilize a round shoulder contact retention system.
Bulkhead mounted housing, Rear mounting, Size: 24 B, Low construction, Double locking lever, Polycarbonate (PC), Stainless steel, Material (hood/housing): Aluminium die-cast, Powder-coated, RAL 7037 (dust grey), Material (seal): NBR, Degree of protection: IP66
Bulkhead mounted housing, Rear mounting, Size: 24 B, Low construction, Double locking lever, Polycarbonate (PC), Stainless steel, Material (hood/housing): Aluminium die-cast, Powder-coated, RAL 7037 (dust grey), Material (seal): NBR, Degree of protection: IP66
3-phase loop bridge for 4 CONTACTRON modules, with Push-in connection and 22.5 mm housing width, connecting cable: 3 m
3-phase loop bridge for 4 CONTACTRON modules, with Push-in connection and 22.5 mm housing width, connecting cable: 3 m
Die, for Crimpfox-M, for unshielded RJ11 connectors, packed in a serial storage box
Die, for Crimpfox-M, for unshielded RJ11 connectors, packed in a serial storage box
Tool wrap, equipped with: cable cutter, side cutter, needle-nose and stripping pliers, stripping tool with round longitudinal cutter Ø 8 ... 13 mm, VDE screwdriver – slim design, slotted: 0.8x4.0 cross: PZ2, phase tester and folding meter
Tool wrap, equipped with: cable cutter, side cutter, needle-nose and stripping pliers, stripping tool with round longitudinal cutter Ø 8 ... 13 mm, VDE screwdriver – slim design, slotted: 0.8x4.0 cross: PZ2, phase tester and folding meter
Spring set for profile cutters PPS...
Spring set for profile cutters PPS...
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors
Spacial SM brush flexible cable entry gaskets. Enclosure W is600 mm. D is 34 mm. Cable management accessory. Standard cable gland plate support. Clipped fixing mode. 2 gaskets included. SM compact enclosure compatible.
Spacial SM brush flexible cable entry gaskets. Enclosure W is600 mm. D is 34 mm. Cable management accessory. Standard cable gland plate support. Clipped fixing mode. 2 gaskets included. SM compact enclosure compatible.
This product is part of the Lexium range, an offer of motion servo drives and servo motors. This planetary gearbox has straight teeth, lubricated for life. The gearbox external diameter is 120mm. It is a gearbox with a reduction ratio of 5/1, maximum axial force (Fa) of 2100N at 100RPM and continuous output torque of 195N.m at 100RPM at 30°C. It offers service life of about 30000h at 100RPM at 30°C. It is an IP54 rated product. The enclosure is made of black anodized aluminium. It weighs 6kg. This product is compatible with servo motors and Lexium servo drives. It can be mounted in any position. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. Stepper drives and stepper motors for motion control.
This product is part of the Lexium range, an offer of motion servo drives and servo motors. This planetary gearbox has straight teeth, lubricated for life. The gearbox external diameter is 120mm. It is a gearbox with a reduction ratio of 5/1, maximum axial force (Fa) of 2100N at 100RPM and continuous output torque of 195N.m at 100RPM at 30°C. It offers service life of about 30000h at 100RPM at 30°C. It is an IP54 rated product. The enclosure is made of black anodized aluminium. It weighs 6kg. This product is compatible with servo motors and Lexium servo drives. It can be mounted in any position. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. Stepper drives and stepper motors for motion control.
Pressing tool, Crimping tool for wire-end ferrules, 0.14mm², 6mm², Trapezoidal crimp
Pressing tool, Crimping tool for wire-end ferrules, 0.14mm², 6mm², Trapezoidal crimp
Magazine, for the THERMOMARK PRIME and the THERMOMARK CARD, for accommodating UCT-WMCO ... (18x4)
Magazine, for the THERMOMARK PRIME and the THERMOMARK CARD, for accommodating UCT-WMCO ... (18x4)
It is a 200-500V AC/DC control module for 3 poles TeSys Giga 115-225 contactor (advanced version). Coil designed for less energy consumption and wider voltage band-width, connection by spring terminal. It allows contactor operation with high AC-3 operating rates until 600 cycles/hour and environments until 60°C. Control module has connectors for connecting the coil control A1, A2 circuit & PLC output control, pole status and diagnostic signaling circuits. Local and Remote Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It is accessible from the front and maintained with very low down times. Unique QR code provides quick access to complete product data.
It is a 200-500V AC/DC control module for 3 poles TeSys Giga 115-225 contactor (advanced version). Coil designed for less energy consumption and wider voltage band-width, connection by spring terminal. It allows contactor operation with high AC-3 operating rates until 600 cycles/hour and environments until 60°C. Control module has connectors for connecting the coil control A1, A2 circuit & PLC output control, pole status and diagnostic signaling circuits. Local and Remote Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It is accessible from the front and maintained with very low down times. Unique QR code provides quick access to complete product data.
TeSys F DC coil 110V (voltage code FD), low sealed consumption, for TeSys F 3-pole and 4-pole contactors LC1 F185, F225. It operates in the voltage limits 0.85-1.1 Uc and environments until 55°C. It provides to the contactor high operating rates until 2400 cycles/hour. Green Premium compliant (RoHS/REACh).
TeSys F DC coil 110V (voltage code FD), low sealed consumption, for TeSys F 3-pole and 4-pole contactors LC1 F185, F225. It operates in the voltage limits 0.85-1.1 Uc and environments until 55°C. It provides to the contactor high operating rates until 2400 cycles/hour. Green Premium compliant (RoHS/REACh).