Wyszukiwarka produktów

Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This safety DC discrete input module provides 4 discrete inputs with sink discrete input logic, 24V DC. There is an isolation between channel and bus at 500V AC. This safety module, associated with TM5CSLC safety logic controller provides distributed safety solutions on Sercos bus up to SIL 3, Cat. 4, PL e, SIL CL3. It features 2 LEDs for power supply, 2 LEDs for safety status and 20 LEDs for input status signaling. It is furnished with 2 wires for electrical connection. Its housing colour is red. It weighs 0.025kg. It measure 75mm deep, 25mm wide, 99mm high. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. It is compatible with Modicon TM5CSLC safety logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

SIMATIC dp, PROFINET et 200eco pn 8di 24V DC 4 x m12, double-assignement, degree of protection IP65/67

SIPLUS S7-300 SM331 8AE WITH CONFORMAL COATING BASED ON 6ES7331-7PF01-0AB0 . ANALOG INPUT OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST STANDARD 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN

Battery expansion enclosure for holding two mono cells. Suitable for SIMATIC RTU3000C family; batteries must be purchased separately and are not included in scope of delivery. Observe note regarding battery type in the Equipment Manual!

CONNECT. CABLE UNSHIELDED FOR SIMATIC S7-300/1500 BETWEEN FRONT CONN. MODULE AND CONNECTING MODULE 16 X 0.14SQMM W. IDC-CONNECTORS, LENGTH 8,0M

SIMATIC dp, PROFINET mounting bar for et200eco pn lengths 0,5m

SIMATIC PN/J1939 Link. gateway from PROFINET to J1939 networks. IP20

SIMATIC S7, MEMORY CARD FOR S7-400, LONG VERSION, 5V FLASH-EPROM, 8 MBYTES

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. This sub-base for plug-in relay, provides 16 channels. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is furnished with screw clamp terminals for electrical connection. It is an IP2x rated product. It weighs 0.615kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S2, ABS7SA2, ABS7SC2 and ABE7ACC20 connection sub-base accessory. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.

As-i compact module k60 digital a/b slave, 4 di/4 dq, IP67 4 x input, maximum 200 ma 4 x output, 2 a, 24 V DC maximal 4 a for all outputs 8 x m12 socket y-ii assignment mounting plate 3rk1901-0ca00 must be ordered separately

Round cable set; connection 1: IDC/FLK socket strip (1x 26-position); connection 2: IDC/FLK socket strip (1x 26-position); cable length: 1 m

SIPLUS ET200M ACTIVE BUS MODULE FOR INTEGRATION OF AN 80 MM WIDE I/O MODULE -25 ... +70 DGR C WITH CONFORMAL COATING BASED ON 6ES7195-7HC00-0XA0 . FOR FUNCTION: INSERT AND REMOVE

SIMATIC dp,bus connector for PROFIBUS up to 12 mbit/s 90 degree angle cable outlet, 15,8 x 72,2 x 36,4 mm (wxhxd), ipcd techology fast connect, with pg socket

Round cable set; controller: SIMATIC® TOP connect; connection 1: IDC/FLK socket strip (1x 16-position); connection 2: IDC/FLK socket strip (1x 14-position); cable length: 10 m

SIMATIC et 200sp, 10 color identification labels color code cc52, for periphery modules, module specific, for bu-type c0

SIMATIC et 200sp, analog output module, aq 2xu/i high feature, fits to bu-type a0, a1, color code cc00, channel diagnosis, 16bit, +/-0,1%

SIMATIC BusAdapter BA 2xM12. 2 x M12 push-pull sockets. D-coding. also suitable for standard M12. for PROFINET

SIMATIC TDC, SUBRACK UR6021, 21 SLOTS, VMEBUS, 8 P0 SLOTS, EXCHANGEABLE FANS, SUITABLE FOR GDM, 5-ROW FEMALE CONNECTOR