Fluke
Fluke P3214-5
1 / 1
- Part Number
- Fluke P3214-5
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Operating Fluids
- Operating fluids
- Distilled or deionized water
Pressure Ranges
- Distilled water operated
- Ranges to 10,000 psi (700 bar)
Accuracy
- Accuracy1
- ±0.015% of reading (±0.008% optional)
Weight Increments
- Minimum standard weight increments
- Up to 500 psi (35 bar): 1 psi (0.1 bar)500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)Model P3112: 1 psi (0.1 bar)
- Optional fractional weights
- Up to 500 psi (35 bar): 0.1 psi (0.01 bar)500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)
Materials of Construction
- Standard weight material
- Series 3 non-magnetic austenitic stainless steel
- Weight density
- 2.7 g/cm³
- Optional fractional weights
- Solution heat treated aluminum
- Piston material
- Tungsten carbide with nickel binderDensity- 15.0 g/cm³
- Cylinder material
- Hardened martensitic steelTungsten carbide (water above 500 psi, 35 bar)
- Thermal coefficients of expansion
- Oil piston/cylinder 16.5 ppm/°CWater (above 500 psi, 35 bar) 11 ppm/°C
Options
- PressCal software
- Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments
- Fluids
- Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory.
General
- Test port adaptors
- 1/8, 1/4, 3/8 and 1/2NPT or BSP
- Instrument weight
- 36 lbs (16 kg)
- Instrument size (W x D x H)
- 17.5 x 12 x 8.5 in (440 x 300 x 215 mm)
- Mass set weight (typical)
- 80 lbs (36 kg)
- Reservoir volume
- 150 cc
- Screw press displacement
- 5.5 cc
- Pump displacement
- 4.7 cc per stroke
- O-ring seal materials
- Buna N as standard, Viton and EPDM available
Powiązane produkty
Inne kategorie
SiłownikiBlokiKable, rury i wężeSprężarkiSterowanieŁączniki i osprzętCylindry i tłokiElektronikaFiltryHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaniePrzeniesienie napęduPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączaCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne