i3000 Flex 4PK

1 / 1

Part Number: i3000 Flex 4PK

Termin płatności do 90 dni od 500+ dostawców.
Rabaty na odsprzedaż do 40%!

Zarejestruj się

Wyślij zapytanie o cenę

1

Metody płatności:

Poproś o wycenę, a prześlemy Ci informacje o dostępności i cenie.

General Specifications

Weight: 180 g (0.396 lb) (head)
Output connection: 0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
EMC standards: EN 61326: 1998 +A1, A2, and A3
Safety standards: 600 Vrms, Category III, Pollution Degree 2
Head cable diameter: 14.3 mm (0.56in)
Maximum conductor size: 610 mm or 914 mm, depending on model
Operating humidity: 15% to 85% (non-condensing)
Strong temperature range: -40°C to +105°C (-40°F to 221°F) (head)
Safety standards: BS EN 61010-2-032: 2002
Operating temperature range: -20°C to +85°C (-4°F to 185°F) (electronics)
Cable length (head to electronics): 2 m (6.56 ft)
Safety standards: BS EN 61010-031: 2002
Safety standards: BS EN 61010-1: 2001
Weight: 190 g (0.419 lb) (electronics)
Safety standards: Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz
Strong temperature range: -20°C to +85°C (-4°F to 185°F) (electronics)
Operating temperature range: -20°C to +90°C (-4°F to 190°F) (head)
Head bend radius: 38.1 mm (1.5in)
Head circumference: 610 mm (24in)

Electrical Specifications

Current ranges: AC rms
Phase error: < ±1° (45 Hz to 65 Hz)
Accuracy: at +25°C
Noise: 8 mV AC rms (30 A)
Current ranges: 3000 A
Output sensitivity (AC-coupled): 1 mV per A
Current ranges: 300 A
Power supply: 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply
Linearity: ±0.2% of reading
Phase error: ±10° (at 20 kHz)
Temperature coefficient: ±0.08% of reading per °C
Noise: 2 mV AC rms (300 A, 3000 A)
Linearity: 10% to 100% of range
External field: ±1% of range
Frequency range: 10 Hz to 50 kHz (-3 dB)
Position sensitivity: with cable > 25 mm from the coupling
Working voltage: see safety standards section
Load impedance: 100 kΩ minimum
Working voltage: 600 V AC rms or DC
Output sensitivity (AC-coupled): 10 m
Accuracy: ±1% of range (45 Hz to 65 Hz)
Current ranges: 30 A
External field: with cable > 200 mm from the head
Output sensitivity (AC-coupled): 100 mV
Position sensitivity: ±2% of range

Powiązane produkty

7109-2013-1

EI-1625

I1010

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

IKPL3

VPS420-V

9144-C-156

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

C789

FLUKE 971

FLK-LENS/4XTELE2

FLK-LENS/4XTELE2

9143-DW-156

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

P5543

FLUKE 355

FLUKE 566

TL224

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed. Buy Online Now.

9143-E-156

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

FLK-TI-SBC3B

TL238

9144-F-156

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

P5513-2700G-3/C

P5513-2700G-3/C

FLUKE 424D