Honeywell
SV9520H8513/U
Direct Hot Surface Ignition SmartValve® Control. Fast-Slow Opening. Set 3.5" WC. 7 sec HSI Warm-Up.
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Specifications
- Dimensions (in.)
- 3.2 in. wide x 4.9 in. high x 4.1 in.long
- Dimensions (mm)
- 81 mm wide x124 mm high x 104 mm long.
- Includes
- LP Conversion Kit
- Item Type
- Product
- Mounting
- 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
- Electrical Ratings
- 24 Vac
- Frequency
- 50 Hz; 60 Hz
- Approvals, Canadian Standards Association
- CSA International: 112395
- Tradeline Value
- Universal
- Flame Failure Response Time (sec)
- 2 sec @ 5 µA
- PrePurge
- 15 seconds
- Ambient Temperature Range (F)
- 0 F to 175 F
- Ambient Temperature Range (C)
- -18 C to +79 C
- Ignition System Type
- Direct Hot Surface Ignition
- Ignition Sequence
- 7/12 sec
- Type of Gas
- Natural (LP with included conversion kit)
- Flame Sense
- HSI
- Ignition Source
- HSI
- Ignition Trials To Lockout
- 4 trials
- Ignition Trial Time (sec)
- 7 sec
- Typical Ignition Hardware
- Norton 601
- Body Pattern
- Straight-through
- Opening Characteristics
- Fast-Slow
- Pressure Regulator Setting (psi)
- 3.5 in. WC
- Pressure Regulator Setting (kPa)
- 0.87 kPa
- Pressure Ratings (psi)
- 1/2 psi
- Pressure Ratings (kPa)
- 3.5 kPa
- Inlet/Outlet Size (in.)
- 1/2 in. NPT x 1/2 in. NPT
- Pilot Gas Outlet
- No
- Capacity (ft³/hr)
- Maximum at 1 in. P.D.--150 ft³/hr; Maximum--200 ft³/hr; Minimum--20 ft³/hr
- Capacity (m³/hr)
- Maximum at 1 in. P.D.--4.2 m³/hr; Maximum--5.7 m³/hr; Minimum--0.6 m³/hr
- Pressure Tapping
- 1/8 in. - NPT
Inne kategorie
AktuatoryBlokiPrzewody, rury i wężeSprężarkiKontrolaŁączniki i złączkiCylindry i tłokiElektronikaFiltracjaHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaczPrzekazywanie mocyPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączkiCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne