Phoenix Contact

1406343

Opis

RJ45 connector, degree of protection: IP20, number of positions: 8, 10 Gbps, CAT6A (IEC 60512-27-100:2008, TIA-568-C.2:2009), material: Zinc die-cast, connection method: IDC, connection cross section: AWG 23- 22, cable outlet: angled
Part Number
1406343
UPC
4046356760898
  • Termin płatności do 90 dni od 500+ dostawców.
  • Rabaty na odsprzedaż do 40%!
Zarejestruj się
Wyślij zapytanie o cenę
1
Metody płatności:
Poproś o wycenę, a prześlemy Ci informacje o dostępności i cenie.

Electrical characteristics

Number of positions
8
Transmission speed
10 Gbps
Transmission characteristics (category)
CAT6A (IEC 60512-27-100:2008, TIA-568-C.2:2009)
GRP transmission properties
CAT6A (IEC 60512-27-100:2008, TIA-568-C.2:2009)
Transmission speed
10 Gbps
Frequency range
to 500 MHz
Rated voltage (III/3)
72 V (DC)

Material data

Flammability rating according to UL 94
V0
Housing material
Zinc die-cast

Mechanical characteristics

Number of positions
8
Connection profile
RJ45
Insertion/withdrawal cycles
≥ 750
Connection method
IDC
Connection cross section AWG
23 - 22 (solid)
Connection cross section AWG
23 - 22 (flexible)
Max. cable diameter
5 mm - 9 mm
External cable diameter
5 mm - 9 mm
Cable outlet
angled
Wire diameter including insulation
≤ 1.6 mm
Degree of protection
IP20
Type
RJ45, IP20
No. of cable outlets
1

Ambient conditions

Ambient temperature (operation)
-40 °C - 70 °C

Standards and Regulations

Flammability rating according to UL 94
V0

Powiązane produkty

202329

202329

Phoenix Contact
Chain bridge, pitch: 6 mm, color: silver
321213

321213

Phoenix Contact
Separating plate, width: 0.8 mm, color: gray
708315

708315

Phoenix Contact
Panel feed-through terminal block, connection method: Screw connection with tension sleeve, number of positions: 1, load current: 18 A, cross section: 0.2 mm² - 6 mm², connection direction of the conductor to plug-in direction: 90 °, width: 6.1 mm, color: green-yellow
712194

712194

Phoenix Contact
Thermal miniature circuit breaker, pluggable in screw-type fuse terminal block UK 6-FSI/C and spring-cage fuse terminal block ST 4-FSI/C
800421

800421

Phoenix Contact
Shrink sleeve, Roll, black, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK W: without print, unperforated, mounting type: slide-on, cable diameter range: 3.2 ... 9.5 mm, lettering field size: 16 x 20000 mm
801536

801536

Phoenix Contact
Conductor marker, can be ordered: by sheet, violet, labeled according to customer specifications, mounting type: insert, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 50
801681

801681

Phoenix Contact
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver, Pack of 25 (50 m)
818373

818373

Phoenix Contact
Marker for terminal blocks, Sheet, orange, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
824351

824351

Phoenix Contact
Fabric label, can be ordered: by line, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 5.5 x 40 mm
824603

824603

Phoenix Contact
Marker for terminal blocks, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
824709

824709

Phoenix Contact
Conductor marker, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: clip on, cable diameter range: 1.9 ... 3.1 mm, lettering field size: 23 x 4 mm, Number of individual labels: 12
0826365

0826365

Phoenix Contact
Conductor marking collar 0826365
827640

827640

Phoenix Contact
Snap-in markers, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 27 x 8 mm, Number of individual labels: 10
828847

828847

Phoenix Contact
Snap-in markers, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, lettering field size: 27 x 12.5 mm, Number of individual labels: 30
829195

829195

Phoenix Contact
Marker for terminal blocks, Sheet, orange, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 5.4 x 4.7 mm, Number of individual labels: 60
829604

829604

Phoenix Contact
Marker for terminal blocks, can be ordered: by sheet, orange, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60
830820

830820

Phoenix Contact
Cable marker, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, cable diameter range: 8 ... 22.2 mm, cable diameter: ≤ 22 mm, lettering field size: 25 x 25 mm, Number of individual labels: 900
830821

830821

Phoenix Contact
Cable marker, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, cable diameter range: 8 ... 22.2 mm, cable diameter: ≤ 22 mm, lettering field size: 25 x 25 mm, Number of individual labels: 900
831924

831924

Phoenix Contact
Device marker, Aluminum label, can be ordered: Piece, red, labeled according to customer specifications, mounting type: screw, rivet, lettering field size: 75.6 x 54 mm, Number of individual labels: 6
899064

899064

Phoenix Contact
Junction box, With flange plate fixing, below, material: Stainless steel, 316L/1.4404, surface resistance: brushed, silver, 500 mm x 400 mm x 160 mm, type of locking: Door with replaceable hinge, scope of supply - ATD: Door hinge with quarter turn locking, Mounting plate, Double-bit key, Fixing angle with mounting screws, M12 grounding bolts, affixed externally, Installation notes, Door hinge with quarter turn locking

Inne kategorie

SiłownikiBlokiKable, rury i wężeSprężarkiSterowanieŁączniki i osprzętCylindry i tłokiElektronikaFiltryHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaniePrzeniesienie napęduPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączaCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne