Phoenix Contact
2316048
Trunk module - FB-ET - 2316048
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Stan produktu:
Oferta z czasem realizacji przez producenta
Wysyłka:1 - 2 Dni robocze
Najlepsza cena:
€136.30
Additional Information
- Part Number
- 2316048
- UPC
- 4046356466165
- Country of Origin
- US
- ETIM
- Group Code : EG000024
- Group Description : PLC's
- Class Description : Fieldbus, decentr. periphery - power supply/segment module
- Class Code : EC001600
- Version : 7
Note
- Utilization restriction
- EMC: class A product, see manufacturer's declaration in the download area
Dimensions
- Width
- 17.5 mm
- Height
- 99.1 mm
- Depth
- 70.4 mm
Ambient conditions
- Ambient temperature (operation)
- -40 °C - 85 °C
- Ambient temperature (storage/transport)
- -40 °C - 85 °C
- Permissible humidity (operation)
- 10 % - 95 % (non-condensing)
- Degree of protection
- IP20
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 50 years
- China RoHS
- For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
Safety data
- Input voltage Ui
- 17.5 V (for FB-2SP in a FNICO/FISCO ic system)
- ATEX
- Sira 08ATEX4302X; II 3G Ex nA IIC T4 Gc II 3G Ex ic IIC T4 Gc, FISCO ic II 3G Ex nL IIC T4 Gc, FNICO
- IECEx
- IECEx SIR 08.0109X; Ex nA IIC T4 Gc; Ex ic IIC T4 Gc, FISCO ic; Ex nL IIC T4 Gc, FNICO
- CSA, USA/Canada
- Class I, Division 2, Groups A,B,C,D; Ex nA IIC T4 Class I, Zone 2, AEx nA IIC T4
Interfaces
- Interface 1
- Foundation Fieldbus and PROFIBUS PA Segment
- Connection method
- Pluggable COMBICON screw connection for each spur
- Termination resistor
- 100 Ω, external removable plug included
- Conductor cross section solid min.
- 0.2 mm²
- Conductor cross section solid max.
- 2.5 mm²
- Conductor cross section flexible min.
- 0.2 mm²
- Conductor cross section flexible max.
- 2.5 mm²
- Conductor cross section AWG min.
- 24
- Conductor cross section AWG max.
- 12
- Surge protection
- Active if voltage exceeds 39 V (typ.) or 41 V (max.)
- Voltage drop trunk line / outputs
- ≤ 0.2 V
Standards and Regulations
- Type of test
- Corrosive resistance in acc. to ANSI-ISA 71.04-1985 - Severity level G3
- Designation
- Standards/regulations
- Standards/regulations
- Ring wave noise immunity in acc. with IEC 61000-4-12
- Standards/regulations
- Dry heat in acc. with IEC 61131-2
- Standards/regulations
- Damp heat in acc. with IEC 61131-2
- Standards/regulations
- Shock and vibration in acc. with EN 61131-2 and EN 50178
- Standards/regulations
- IEC 61158-2
- Standards/regulations
- IEC 60529, IEC 61158-2
- Standards/regulations
- NE21
- Standards/regulations
- EN 61326, EN 60068-2-27, EN 60068-2-6
- Standards/regulations
- FF-846
- Shock
- 15g, 11 ms
- Vibration (operation)
- 1g, 10 Hz - 150 Hz
- Conformance
- CE-compliant, additionally EN 61326
- Fieldbus Foundation
- FF-846
- ATEX
- Sira 08ATEX4302X; II 3G Ex nA IIC T4 Gc II 3G Ex ic IIC T4 Gc, FISCO ic II 3G Ex nL IIC T4 Gc, FNICO
- IECEx
- IECEx SIR 08.0109X; Ex nA IIC T4 Gc; Ex ic IIC T4 Gc, FISCO ic; Ex nL IIC T4 Gc, FNICO
- CSA, USA/Canada
- Class I, Division 2, Groups A,B,C,D; Ex nA IIC T4 Class I, Zone 2, AEx nA IIC T4
Power supply
- Nominal supply voltage
- 24 V DC (IIC)
- Nominal supply voltage
- 32 V DC (IIB)
- Supply voltage range
- 24 V DC - 32 V DC
- Max. current consumption
- 12 mA (with terminator)
- Typical current consumption
- 8 mA (without termination resistor)