101176296

1 / 5

Part Number: 101176296

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - digital I/O module

Class Code : EC001599

Version : 7

Termin płatności do 90 dni od 500+ dostawców.
Rabaty na odsprzedaż do 40%!

Zarejestruj się

Wyślij zapytanie o cenę

1

Metody płatności:

Poproś o wycenę, a prześlemy Ci informacje o dostępności i cenie.

Electrical data

Current consumption: 50 mA
Current consumption, maximum: 500 mA

Electrical data - AS-Interface specification

AS-i Version: V 2.1
AS-i Profile: S-7.B.F.E
AS-i, IO-Code: 0x7
AS-i, ID-Code: 0xB
AS-i, ID-Code1: 0xF
AS-i, ID-Code2: 0xE
AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0: Solenoid control
AS-i Outputs, DO 1: No Function
AS-i Outputs, DO 2: No Function
AS-i Outputs, DO 3: No Function
AS-i Parameter bits, P0 ... P3: No function
Note (AS-i Parameter bits): Set the parameter outputs to "1111" (0xF) | FID: periphery error
AS-i Input module address: 0
Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Mechanical data - Dimensions

Diameter of sensor: 28 mm
Height of sensor: 86.5 mm

Pin assignment

Connection: AS-i connection
PIN 1: AS-i +
PIN 2: (Aux -)
PIN 3: AS-Interface -
PIN 4: (Aux +)
Connection: Sensor connection
PIN 1: Brown - Opener (NC)
PIN 2: Blue - Opener (NC)
PIN 3: White - Opener (NC)
PIN 4: Black - Opener (NC)
PIN 5: Red - Magnet (+) AUS
PIN 6: Grey - Solenoid GND

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

General data - Features

Cross-circuit detection: Yes
Integral system diagnostics, status: Yes
Number of inputs for NC: 2
Number of pre-wired cable: 1

General data

Standards: EN 50295 | EN ISO 13849-1 | EN IEC 60947-5-1 | EN IEC 61508
Connector (electric): Sensor connection: pre-wired cable 6-pole | AS-i connection: connector plug M12, 4-pole
Enclosure material: Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight: 115 g

Safety classification

Standards: EN IEC 61508
Performance Level, up to: e
Category: 4
PFH value: 2.04 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in: 3
Mission time: 20 Year(s)

Electrical data - AS Interface

Rated operating voltage: 26.5 ... 31.6 VDC (Protection against polarity reversal)

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +55 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +85 °C
Relative humidity, minimum: 30 %
Relative humidity, maximum: 95 %
Note (Relative humidity): non-condensing
Protection class: II

Mechanical data - Connection technique

Termination: 1 NC contacts / 1 NC contacts
Length of cable: 2 m
Wire cross-section: 0.23 mm
Wire cross-section: 23 AWG

Approvals - Standards

Certificates: cULus

Status indication

Note (LED switching conditions display): (1) LED green: Supply voltage | (2) LED red: Communication error | (3) LED yellow : Enabling status