- Product Compatibility
- servo motor BMH 70 mm, 2
- Type Of Cable
- single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
- Discrete Input Logic
- positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
- Height
- 270 mm
- Electrical Isolation
- between power and control
- Physical Interface
- 2-wire RS485 multidrop Modbus
- Status Led
- 1 LED (Red) servo drive voltage
- Discrete Input Voltage
- 24 V DC capture
- Transmission Rate
- 9600, 19200, 38400 bps 40-40 m Modbus
- Response Time
- <= 5 ms compliment of STO_A, compliment of STO_B
- Signalling Function
- display of faults 7 segments
- Marking
- CE
- Net Weight
- 2.1 kg
- Contact Bounce Time
- <= 1 ms compliment of STO_A, compliment of STO_B
- Connector Type
- RJ45 (labelled CN7) Modbus
- Communication Interface
- Modbus, Integrated || SERCOS III, Integrated
- Braking Current
- 50 mA
- Electrical Connection
- terminal 3 mm², AWG 12 CN8)
- Discrete Output Voltage
- <= 30 V DC
- Switching Frequency
- 8 kHz
- Discrete Output Number
- 3
- Discrete Output Logic
- positive or negative DO)EN/IEC 61131-2
- Discrete Input Type
- capture CAP
- Safety Function
- STO (safe torque off), Integrated
- Number Of Addresses
- 1-247 Modbus
- Output Voltage
- <= power supply voltage
- Operating Position
- vertical +/- 10 degree
- Maximum Leakage Current
- 30 mA
- Width
- 68 mm
- Overvoltage Category
- III
- Depth
- 237 mm
- Tightening Torque
- CN8 0.5-0.5 N.m
- Discrete Input Number
- 2 capture
- Discrete Output Type
- logic DO)24 V DC
- Response Time On Output
- 250 µs DO)discrete
- Safety Level
- SIL 3 EN/IEC 61508
- Sampling Duration
- 0.25 ms