Schneider Electric
STBDDI3425K
digital input kit, Modicon STB, basic, 24V DC, 4 I
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
263,91 zł
1
Metody płatności:
Łącznie 12 części w magazynie od 17 dostawców
Stan produktu:
Oferta z czasem realizacji przez producenta
Wysyłka:Na zapytanie
Najlepsza cena:
€30.32
Additional Information
- Part Number
- STBDDI3425K
- UNSPSC
- 32151601
- Tariff Code
- 8538908180
- Country of Origin
- ID
Environment
- Product Certifications
- UL || FM Class 1 Division 2 || CSA
- Ambient Air Temperature For Storage
- -40...185 °F without derating
- Standards
- IEC 61131-2 Type 1
- Ambient Air Temperature For Operation
- 0-60 °C without derating)
- Shock Resistance
- 30 gn 11 ms IEC 88 reference 2-27
- Vibration Resistance
- 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
- Ip Degree Of Protection
- IP20 conforming to IEC 61131-2 class 1
- Pollution Degree
- 2 IEC 60664-1
- Ambient Air Temperature For Storage
- -40-85 °C without derating
- Relative Humidity
- 95-95 % 60-60 °C without condensation
- Operating Altitude
- <= 6561.68 ft (2000 m)
- Ambient Air Temperature For Operation
- 32...140 °F without derating
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Insulation Between Channels And Logic Bus
- 1500 V for 1 minute
- Cold Swapping
- yes
- Height
- 18.4 mm
- Current Supplied By Sensor
- 50 mA per channel
- Absolute Maximum Voltage
- 56 V 1.3 ms
- Status Led
- 1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (IN1 to IN4)
- Hot Swapping Fallback
- yes for basic NIMs
- Permissible Voltage
- 30 V
- Supply
- power distribution module
- Protection Type
- power protection integrated fuse on PDM time lag 5 A || input protection resistor-limited || reverse polarity protection
- Current Consumption
- 45 mA 5 V DC logic bus
- Discrete Input Current
- 8 mA
- Marking
- CE
- Current State 0 Guaranteed
- <= 1.2 mA
- Net Weight
- 0.111 kg
- Input Voltage Limits
- 11...30 V at state 1 || -3...5 V at state 0
- Current State 1 Guaranteed
- >= 2.5 mA
- Discrete Input Logic
- positive
- Response Time
- 3.5 ms off-to-on || 3.8 ms on-to-off
- Width
- 125 mm
- Overvoltage Category
- II
- Depth
- 65.1 mm
- Product Compatibility
- I/O base STBXBA1000 || power distribution module STBPDT3100/3105
- [Us] Rated Supply Voltage
- 24 V DC
- Input Filtering
- 3 ms
Specifications
- Range Of Product
- Modicon STB distributed I/O solution
- Discrete Input Voltage
- 24 V
- Discrete Input Voltage Type
- DC
- Product Or Component Type
- basic digital input kit
- Discrete Input Number
- 4
- Kit Composition
- STBXBA1000 base || STBDDI3425 module || STBXTS2100, 6-terminal spring clamp connector || STBXTS1100, 6-terminal screw type connector