- Cold Swapping
- yes
- Height
- 28.1 mm
- Discrete Output Logic
- positive or negative configurable
- Status Led
- 1 LED (Green) EN validation input status (EN) || 1 LED (Green) module status (RDY) || 1 LED (Green) reset input status (RST) || 1 LED per counting input (Green) counting input status (INA, INB) || 1 LED per output (Green) output status (OUT1, OUT2) || 1 LED (Red) module error (FLT)
- Filter Time
- 0 ms digital 40000 Hz counting inputs || 0.4 ms digital 1000 Hz counting inputs || 1.2 ms digital 400 Hz counting inputs || 2.5 µs analog counting inputs || 25 µs analog auxiliary input
- Maximum Load Inductance
- 500 mH 4 Hz
- Output Voltage Type
- DC
- Counter Functions
- measure time periods || up/down counting || down counting || frequency meter || loop (modulo) counting || count events
- Supply
- power distribution module
- Maximum Voltage Drop
- <3 V at state 1
- Current Consumption
- 60...100 mA 5 V DC logic bus
- Counting Input Number
- 2
- Marking
- CE
- Input Logic
- positive
- Current State 0 Guaranteed
- <= 1.5 mA
- Input Voltage Limits
- 19.2...30 V
- Voltage State 0 Guaranteed
- -3...5 V
- Fallback Status
- hold last value configured || state 0 for output channels by default || state 0 or 1 for each channel configured
- Input Current
- 6 mA
- Current State 1 Guaranteed
- >= 2 mA
- Hot Swapping Fallback
- fallback output depending on parameter setting configured mandatory standard network interface module || fallback to 0 not configured mandatory standard network interface module || fallback to 0 basic network interface module
- Counter Configuration
- Modicon configuration software
- Output Voltage Limits
- 19.2...30 V
- Input Voltage
- 24 V
- Nominal Output Current
- 0.5 A
- Output Voltage
- 24 V
- Input Voltage Type
- DC
- Maximum Counting Frequency
- 40000 Hz
- Width
- 128.3 mm
- Overvoltage Category
- II
- Depth
- 70 mm
- Input Compatibility
- 2/3 wire photo-electric sensor || mechanical contact || with 2-wire/3-wire proximity sensors || incremental encoder
- Product Compatibility
- mounting base STBXBA3000 || power distribution module STBPDT3100/3105
- Protection Type
- overload protection electronic tripping manual or automatic reset || short-circuit protection electronic tripping manual or automatic reset || overload protection current limiter || short-circuit protection current limiter
- Insulation Between Channels And Bus
- 500 V
- [Us] Rated Supply Voltage
- 24 V DC
- Maximum Leakage Current
- 0.1 mA at state 0
- Kit Composition
- STBEHC3020 module || STBXBA3000 base || STBXTS215018 terminal spring clamp connector
- Voltage State 1 Guaranteed
- 11...30 V