Schneider Electric
T02DN23G7
1 / 1
Opis
Końcówka Serii
TeSys N contactors and starters conform to NEMA ICS2 standards. The NEMA size is printed directly on the face of the contactor. This NEMA size 2 reversing contactor consists of contactors that are mechanically and electrically interlocked. This 3 pole reversing contactor mounts on 35mm DIN rail and has a 45 amperage continuous current rating. This contactor has 3 HP at 115 VAC and 7.5 HP at 230 VAC single phase ratings. The contactor also has ratings of 10 HP at 200, 15 HP at 230 VAC and 25 HP at 460 and 575 VAC poly phase. The reversing contactor is wired for common control with a 120 VAC 50/60 Hz replaceable coil. Contactor has 1 normally open and 1 normally closed auxiliary contact. This contactor is not in an enclosure. This contactor is 5.47 inches tall, 4.67 inches wide and 4.72 inches deep. It weighs 4.56 lbs. The screw clamp terminals will accept power wires from 16 AWG to 4 AWG and control wires from 16 AWG to 12 AWG. This TeSys N contactor is UL listed and CSA Certified.- Part Number
- T02DN23G7
- Tariff Code
- 8536490065
- UNSPSC
- 39121529
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Pvc Free
- Yes
- Toxic Heavy Metal Free
- Yes
- Reach Regulation
- Free of Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
- Reach Free Of Svhc
- Yes
- China Rohs Regulation
- Pro-active China RoHS declaration (out of China RoHS legal scope)
- Eu Rohs Directive
- Compliant
Complementary
- [Uc] Control Circuit Voltage
- 120 V AC
- Auxiliary Contact Composition
- 1 NO + 1 NC
- Electrical Connection
- screw clamp terminals
- Phase
- 3 phase
- Poles Description
- 3P
- Line Rated Current
- 45 A
- Control Circuit
- common control circuit
- [Ue] Rated Operational Voltage
- 600 V AC
Specifications
- Range Of Product
- TeSys N
- Nema Size
- 2
- Contactor Application
- reversing
- Product Or Component Type
- contactor
- Maximum Horse Power Rating
- 10 hp 200 V AC || 15 hp 230 V AC || 25 hp 460 V AC || 25 hp 575 V AC
Environmental
- Product Certifications
- UL Listed || CSA
- Nema Degree Of Protection
- not rated (open device)
Dokumenty
Data Sheet
PobierzPowiązane produkty
Inne kategorie
SiłownikiBlokiKable, rury i wężeSprężarkiSterowanieŁączniki i osprzętCylindry i tłokiElektronikaFiltryHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaniePrzeniesienie napęduPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączaCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne