Schneider Electric
XMLP1K0PP730
1 / 1
Opis
Końcówka Serii
- Country of Origin
- CH
- Part Number
- XMLP1K0PP730
- Tariff Code
- 9026204000
- EAN
- 41111927
- UNSPSC
- 41111927
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Specifications
- Pressure Sensor Type
- pressure transmitter
- Analogue Output Function
- 0...10 V, 3-wire
- Type Of Output Signal
- analogue
- Controlled Fluid
- fresh water 0-135 °C) || air -40-135 °C) || hydraulic oil -40-135 °C) || gas -40-135 °C) || refrigeration fluid -40-135 °C)
- Range Of Product
- Telemecanique Pressure sensors XM
- Electrical Connection
- 1 male connector Packard Metripack 150 3 pins
- Pressure Sensor Size
- 1000-1000 psi
- Quantity Per Set
- set of 1
- Electrical Circuit Type
- control circuit
- Product Or Component Type
- electronic pressure sensors
- Type Of Packing
- individual
- [Us] Rated Supply Voltage
- 24 V DC SELV 12-33 V)
- Local Display
- without
- Pressure Sensor Name
- XMLP
- Current Consumption
- < 7 mA
- Fluid Connection Type
- 1/4" - 18 NPT (male)
Complementary
- Accuracy
- 0.1 % of the measuring range
- Diameter
- 26 mm
- [Uimp] Rated Impulse Withstand Voltage
- 0.5 kV
- Mechanical Durability
- 10000000 cycles
- Drift Of The Zero Point
- +/- 0.02 % of measuring range/°K
- Operating Position
- any position
- Measurement Accuracy
- +/- 0.5 % of the measuring range
- Electromagnetic Compatibility
- electrical fast transient/burst immunity test EN/IEC 61000-4-4 2 kV || electrostatic discharge immunity test EN/IEC 61000-4-2 8 kV air, 4 kV contact || 1.2/50 µs shock waves immunity test EN/IEC 61000-4-5 1 kV 42 Ohm || immunity to magnetic fields EN/IEC 61000-4-8 100 A/m 50 Hz || susceptibility to electromagnetic fields EN/IEC 61000-4-3 10 V/m 80...3000 MHz || radiated RF fields EN/IEC 61000-4-6 10 V 0.01...80 MHz
- Protection Type
- reverse polarity || load short-circuit
- Drift Of The Sensitivity
- +/- 0.02 % of measuring range/°K
- Maximum Permissible Accidental Pressure
- 3000 psi
- Materials In Contact With Fluid
- stainless steel AISI 316L
- Length
- 55 mm
- Destruction Pressure
- 6000 psi
- Net Weight
- 0.09 kg
- Response Time On Output
- <= 2 ms 10...90 % of full scale
- Pressure Setting Range
- 0-1000 psi
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP1511013EN
- Sustainable Offer Status
- Green Premium product
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Reach Free Of Svhc
- Yes
Environment
- Product Certifications
- RCM || CE || EAC || cULus
- Ambient Air Temperature For Operation
- -30-85 °C
- Ambient Air Temperature For Storage
- -50-100 °C
- Standards
- EN/IEC 61326-2-3 || NSF ANSI 61
- Shock Resistance
- 100 gn 11 ms EN/IEC 60068-2-27
- Vibration Resistance
- 20 gn 15-2000 Hz) EN/IEC 60068-2-6
- Protective Treatment
- TC
- Ip Degree Of Protection
- IP65 conforming to EN/IEC 60529 || IP67 conforming to EN/IEC 60529