821-107

TOPJOB® S subdistribution board set; with push-button

Termin płatności do 90 dni od 500+ dostawców.
Rabaty na odsprzedaż do 40%!

Zarejestruj się

€10,500.00

1

Metody płatności:

Łącznie 1 część w magazynie od 2 dostawców

Stan produktu:

Fabrycznie Nowy

Dostępność:: 1 szt.
W magazynie

€10,500.00za 1 szt..

Aktualizacja 5.06.2024

Commercial Data

Country of origin: DE
GTIN: 4066966339536
Customs tariff number: 85371098990

Material Data

Note (material data): <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
Fire load: 6.089 MJ
Weight: 473.597 g

Specifications

Product Group Code: 0022

Powiązane produkty

283-901

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

285-197

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

294-4002

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

734-126

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

210-333/600-078

210-333/600-078

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

231-673

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

739-309

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

284-624

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

787-2861/108-020

787-2861/108-020

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

231-635/017-000

231-635/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

736-604

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

236-424

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

750-1504

16-channel digital output; 24 VDC; 0.5 A

2852-7115

WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint

770-1313

Plug; 3-pole; Cod. P; 4,00 mm²; red

890-523

Shield connecting plate; 3-pole; for sockets and plugs; silver-colored

281-998

3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; light gray

745-302/005-000

745-302/005-000

PCB terminal block; 6 mm²; Pin spacing 7.5 mm; 2-pole; CAGE CLAMP®; commoning option; 6,00 mm²; gray

770-680

Mounting plate; for distribution boxes; gray

261-327

Space-saving, 2-conductor end terminal block; without push-buttons; without protruding snap-in mounting foot; 1-pole; for terminal strips with snap-in mounting feet; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; green-yellow