Wago

857-551

Current signal conditioner; Current input signal; Current and voltage output signal; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width
857-551
857-551
857-551
857-551
  • Termin płatności do 90 dni od 500+ dostawców.
  • Rabaty na odsprzedaż do 40%!
Zarejestruj się
Wyślij zapytanie o cenę
1
Metody płatności:

Additional Information

Part Number
857-551
UPC
4055143967129
Tariff Code
85437090300
ETIM
Group Code : EG000026
Group Description : Sensors
Class Description : Current value transformer
Class Code : EC002475
Version : 7

Output (Analog)

Output signal type
Current || Voltage
Output signal (voltage)
0 … 5 V; 1 … 5 V; 0 … 10 V; 2 … 10 V (can be inverted, also bipolar)
Output signal (current)
0 … 10 mA; 2 … 10 mA; 0 … 20 mA; 4 … 20 mA (can be inverted, also bipolar)
Load impedance (voltage output)
≥ 2 kΩ
Load impedance (current output)
≤ 600 Ω

Signal Processing

Measurement method
True RMS measurement; Arithmetic mean value
Software filter (adjustable)
Moving average value (filter level: 30)
Step response (typ.)
60 ms (for software filter 3)
Step response (max.)
250 ms

Configuration

Configuration options
DIP switch || WAGO Interface Configuration Software

Environmental Requirements

Ambient temperature (operation)
-40 … +70 °C (at nominal current)
Ambient temperature (storage)
-40 … +85 °C
Temperature range of connection cable
≥ (Tambient + 34 K)
Relative humidity
5 … 95 % (no condensation permissible)
Operating altitude (max.)
2000 m

Output (Digital)

Switching voltage (DO) max.
Supply voltage applied
Continuous current (DO) max.
100 mA (no internal restriction)
Number of switching thresholds (DO)
1 or 2 (adjustable)
Configurable rise/fall delay time (DO)
0 … 60 s (via software)

Connection Data

Connection technology
Push-in CAGE CLAMP®
Solid conductor
0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor
0.34 … 2.5 mm² / 22 … 14 AWG
Strip length
9 … 10 mm / 0.35 … 0.39 inches

Signaling And Communication

Configuration options
DIP switch || WAGO Interface Configuration Software

Supply

Nominal supply voltage US
DC 24 V (SELV)
Supply voltage range
±30 %
Current consumption at nominal supply voltage
≤ 50 mA (+ IDO)

Physical Data

Width
6 mm / 0.236 inches
Height
94 mm / 3.701 inches
Depth from upper-edge of DIN-rail
97.8 mm / 3.85 inches

Measurement Error

Transmission error (max.)
≤ 0.5 % (of the full scale value)
Temperature coefficient
1 A input: ≤ 0.01 %/K (typ.); ≤ 0.02 %/K (max.); 5 A input: ≤ 0.02 %/K (typ.); ≤ 0.04 %/K (max.)

Material Data

Fire load
0.013 MJ
Weight
38.200 g

Input

Input signal type
Current
Input signal (current)
AC/DC 0 … 5 A (IN 1; block arrangement); AC/DC 0 … 6 A (IN 1; individual arrangement)
Frequency range
16 … 200 Hz
Input resistance (current input)
47 mΩ (IN 1); 10 mΩ (IN 2)
Input current (max.)
15 A (IN 1; 5 s); 10 A (IN 3; 5 s)
Response threshold
10 mA (IN 1); 2 mA (IN 3)
Resolution (current)
1 mA (IN 1); 0.5 mA (IN 3)

Standards And Specifications

Conformity marking
CE
EMC immunity to interference
EN 61000-6-2, EN 61326-1
EMC emission of interference
EN 61000-6-3; EN 61326-1
Standards/specifications
EN 61010-1

Mechanical Data

Mounting type
DIN-35 rail

Specifications

Product Group Code
0006

Commercial Data

Packaging type
Bag
Country of origin
DE
GTIN
4055143967129
Customs tariff number
85437090300

Notes

Note
Only the WAGO Interface Configuration Software can be used to set the measurement range of 0 to 6 A.Additional setting options via the WAGO Interface Configuration Software

Test Voltage

Test voltage (input/analog output/supply/service interface)
3 kVAC; 50 Hz; 1 min

Insulation Parameters

Overvoltage category
II
Pollution degree
2
Insulation type (input/analog output/supply/service interface)
Double insulation (impedance and basic insulation)Requirement: The GND 1 input is dangerous when active and the measurement is conducted as a low-side measurement!

Powiązane produkty