Weidmuller
1351600000
VPU III R 48V/4KV AC/DC
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Łącznie 1 część w magazynie od 8 dostawców
Stan produktu:
Oferta z czasem realizacji przez producenta
Wysyłka:Na zapytanie
Najlepsza cena:
€42.57
Additional Information
- Part Number
- 1351600000
General Data
- Colour
- orange
- Design
- Installation housing; 1TE, Insta IP 20
- Optical function display
- Green LED = OK, Red LED = arrester is defective, replace
- Protection degree
- IP20
- Rail
- TS 35
- Segment
- Power distribution
- UL 94 flammability rating
- V-0
- Version
- with remote contact
Approvals
- Approvals
- CE, EAC, OEVE
- ROHS
- Conform
Insulation Coordination Acc. To En 50178
- Pollution severity
- 2
- Surge voltage category
- II
Rated Data Iec / En
- Combined pulse U
- 4 kV
- Discharge current, max. (8/20 µs)
- 2 kA
- Fuse
- 16 A
- Leakage current at U
- 30 µA
- Low voltage network
- Single-phase
- Mains frequency at 250 Vmax
- 50...60Hz
- Max. continuous voltage, Uc (AC)
- 50 V
- Max. continuous voltage, Uc (DC)
- 72 V
- Number of poles
- 1
- PE conductor current I
- 30 µA
- Protection level U
- ≤ 950 V
- Rated current I
- 16 A
- Rated voltage (AC)
- 48 V
- Rated voltage (DC)
- 68 V
- Requirements category acc. to IEC 61643-11
- Type III
- Requirements class, acc. to EN 61643-11
- T3
- Response time
- ≤ 100 ns
- Short-circuit current rating I
- 1.5 kA
- Signalling contact
- 250 V 10 A 1 NC
- Temporary surge voltage (over-voltage) - TOV
- 92 V
- Voltage type
- AC/DC
Dimensions And Weights
- Width
- 18 mm
- Width (inches)
- 0.709 inch
- Height
- 102 mm
- Height (inches)
- 4.016 inch
- Depth
- 71.5 mm
- Depth (inches)
- 2.815 inch
- Net weight
- 87 g
Connection Data
- Type of connection
- Screw connection
- Stripping length, rated connection
- 7 mm
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.5 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
- Wire cross-section, solid, min.
- 0.13 mm²
- Wire cross-section, solid, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded, min.
- 0.5 mm²
- Wire connection cross section, finely stranded, max.
- 2.5 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.
- 0.5 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.
- 2.5 mm²
- Connection cross-section, stranded, min.
- 0.5 mm²
- Connection cross-section, stranded, max.
- 2.5 mm²
Technical Data, Signal Line
- Rated current I
- 16 A
Tender Specification Sheets
- Long specification
- Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III R 48V is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the colour of the LEDs changes from green to red. The functional state is also displayed by a voltage-free signalling contact (NC contact). Rated voltage: 48 VAC/DC In/max (8/20 µs): 2 kA protection level < 0.95 kV load current Il: 16 A telecommunication output: contact NC: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU III R 48V Order No. 1351600000 or equivalent
- Short specification
- Class III arrester with Uoc: 4 kV suitable for 48 V AC/DC mains systems. Protection level < 0.95 kV. With remote alert Type: Weidmüller VPU III R 48 V/4 kV Order no. 1351600000 or equivalent
Classifications
- ETIM 6.0
- EC000941
- ETIM 7.0
- EC000941
- EClass 9.0
- 27-13-08-05
- EClass 9.1
- 27-13-08-05
- EClass 10.0
- 27-13-08-05
- UNSPSC
- 30-21-19-21
Connection Data, Remote Alert
- Connection type
- Screw connection
- Max. torque
- 0.5 Nm
- Stripping length
- 5 mm
- Cross-section for connected wire, solid core, min.
- 0.2 mm²
- Cross-section for connected wire, solid core, max.
- 1.5 mm²
Temperatures
- Humidity
- 5 - 95% rel. humidity
- Operating temperature, max.
- 70 °C
- Operating temperature, min.
- -40 °C
- Storage temperature, max.
- 70 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -40 °C...70 °C
- Storage temperature
- -40 °C...70 °C
Inne kategorie
SiłownikiBlokiKable, rury i wężeSprężarkiSterowanieŁączniki i osprzętCylindry i tłokiElektronikaFiltryHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaniePrzeniesienie napęduPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączaCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne