1351900000

VPU I 1 N-PE 260V/50KA

1351900000

1351900000

Termin płatności do 90 dni od 500+ dostawców.
Rabaty na odsprzedaż do 40%!

Zarejestruj się

Wyślij zapytanie o cenę

1

Metody płatności:

Poproś o wycenę, a prześlemy Ci informacje o dostępności i cenie.

Oferta z czasem realizacji przez producenta

Wysyłka:Na zapytanie

Najlepsza cena:

Wyślij zapytanie o cenę

Additional Information

Part Number: 1351900000

General Data

Colour: black, blue
Design: Installation housing; 1TE, Insta IP 20
Optical function display: No
Protection degree: IP20
Rail: TS 35
Segment: Power distribution
Suitable for: Count-in installation (leakage current free)
UL 94 flammability rating: V-0
Version: without telecomm. contact

Approvals

Approvals: CE, EAC, OEVE
ROHS: Conform

Insulation Coordination Acc. To En 50178

Pollution severity: 2
Surge voltage category: IV

Rated Data Iec / En

Discharge current I: 50 kA
Frequency range, max.: 60 Hz
Frequency range, min.: 50 Hz
Fuse: Not required
Leakage current at U: 0 µA
Lightning test current, I: 50 kA
Low voltage network: TT nur für N-PE
Max. continuous voltage, Uc (N-PE): 260 V
Number of poles: 1
Protection level U: ≤ 1.5 kV
Rated voltage (AC): 230 V
Requirements category acc. to IEC 61643-11: Type I, Type II
Requirements class, acc. to EN 61643-11: T1, T2
Response time: ≤ 100 ns
Signalling contact: No
Standards: IEC61643-11, EN61643-11
Suitable for: Count-in installation (leakage current free)
Temporary surge voltage (over-voltage) - TOV: 1,200 V
Voltage type: AC

Dimensions And Weights

Width: 17.8 mm
Width (inches): 0.701 inch
Height: 94 mm
Height (inches): 3.701 inch
Depth: 69 mm
Depth (inches): 2.717 inch
Mounting dimension - height: 75 mm
Net weight: 143 g

Connection Data

Type of connection: Screw connection
Stripping length, rated connection: 15 mm
Tightening torque, min.: 2 Nm
Tightening torque, max.: 3 Nm
Clamping range, rated connection: 16 mm²
Clamping range, min.: 4 mm²
Clamping range, max.: 35 mm²
Wire cross-section, solid, min.: 2.5 mm²
Wire cross-section, solid, max.: 16 mm²
Wire connection cross-section, finely stranded, min.: 2.5 mm²
Wire connection cross section, finely stranded, max.: 25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 50 mm²
Connection cross-section, stranded, min.: 2.5 mm²
Connection cross-section, stranded, max.: 50 mm²

Tender Specification Sheets

Long specification: Pluggable Class I arrestor made from V0 material for LPL III/IV with 50 kA, suitable for TN-S, IT or TT mains systems for protection between N and PE. Protection level < 1.5 kV. Type: Weidmüller VPU I 1 N-PE 260 V/50 kA Order No. 1351900000 or equivalent
Short specification: Class I arrester for LPL III/IV with 50 kA suitable for TN-S, IT or TT mains systems for protection between N and PE. Protection level < 1.5 kV. Type: Weidmüller VPU I 1 N-PE 260 V/50 kA Order no. 1351900000 or equivalent

Classifications

ETIM 6.0: EC000941
ETIM 7.0: EC000941
EClass 9.0: 27-13-08-05
EClass 9.1: 27-13-08-05
EClass 10.0: 27-13-08-05
UNSPSC: 30-21-19-22

Temperatures

Humidity: 5 - 95% rel. humidity
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C

Powiązane produkty