Weidmuller
1478130000
1 / 4
Opis
Power supply, switch-mode power supply unit, 24 V- Part Number
- 1478130000
€91.91
net1
Metody płatności:
- Najlepsza oferta od:
Zaufany dostawca Automa.Net- Dostępność:
- 3 szt.W magazynieZaktualizowano: 07-11-2024
- Gwarancja:
- 12 miesięcy
- Szacowany czas dostawy:
- Na zapytanie
- Stan produktu:
- Fabrycznie Nowe, Zapieczętowane
Fabrycznie Nowe, Zapieczętowane - Nowy, nieużywany, nieotwarty, nieuszkodzony przedmiot w oryginalnym opakowaniu zapieczętowanym przez producenta.
Łącznie 367 części w magazynie od 24 dostawców
Informacje o wysyłce
Bezpieczny proces płatności
Zasady zwrotu i refundacji
Zasady wysyłki
Gwarancja
Dostępne Oferty (28)
Oferta z czasem realizacji przez producenta
Wysyłka:Na zapytanie
Najlepsza cena:
€103.56
General Data
- AC failure bridging time @ I
- min. 20 ms
- Current limiting
- > 120% IN
- Degree of efficiency
- 91.5%
- Derating
- > 60°C / 75% @ 70°C
- Earth leakage current, max.
- 3.5 mA
- Housing version
- Metal, corrosion resistant
- MTBF
- >500.000h (25°C, IEC 61709 (SN29500))
- Mounting position, installation notice
- Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
- Operating temperature
- -25 °C...70 °C
- Power factor (approx.)
- > 0.95 @ 230 V AC
- Power loss, idling
- 2.4 W
- Power loss, nominal load
- 22.3 W
- Protection against reverse voltages from the load
- 30…35 V DC
- Protection degree
- IP20
- Series switching capability
- Yes
- Short-circuit protection
- Yes
- Start-up
- ≥ -40 °C
- Status indication
- LED red/green and relay (≥21.6 V DC LED green, relay on/ ≤20.6 LED red, relay off)
- Surge voltage category
- III
Signalling
- Contact load (NO contact)
- max. 30 V DC / 1 A
- Floating contact
- Yes
- Status indication
- LED red/green and relay (≥21.6 V DC LED green, relay on/ ≤20.6 LED red, relay off)
Connection Data (Input)
- Conductor cross-section, AWG/kcmil , max.
- 10
- Conductor cross-section, AWG/kcmil , min.
- 26
- Conductor cross-section, flexible , min.
- 0.22 mm²
- Conductor cross-section, rigid , max.
- 6 mm²
- Conductor cross-section, rigid , min.
- 0.18 mm²
- Connection system
- Screw connection
- Number of terminals
- 3 for L/N/PE
- Screwdriver blade
- 0.8 x 4.0, PZ 1
- Tightening torque, max.
- 0.6 Nm
- Tightening torque, min.
- 0.5 Nm
- Wire connection cross section, flexible (input), max.
- 4 mm²
Approvals
- Approvals
- CE, CULUS, CULUSEX, cURus, DNV GL, EAC, TUEV
- ROHS
- Conform
- UL File Number Search
- E258476
Dimensions And Weights
- Width
- 60 mm
- Width (inches)
- 2.362 inch
- Height
- 130 mm
- Height (inches)
- 5.118 inch
- Depth
- 125 mm
- Depth (inches)
- 4.921 inch
- Net weight
- 1,050 g
Electrical Safety (Applied Standards)
- Electrical machine equipment
- Acc. to EN60204
- For use with electronic equipment
- Acc. to EN50178 / VDE0160
- Protection against dangerous shock currents
- Acc. to VDE0106-101
- Protective separation / protection against electrical shock
- VDE0100-410 / acc. to DIN57100-410
- Safety extra-low voltage
- SELV according to EN 60950, PELV according to EN 60204, IEC61204
- Safety transformers for switch-mode power supplies
- According to EN 61558-2-16
Rated Data Ul
- Certificate No. (cURus)
- E255651
Emc / Shock / Vibration
- Noise emission in accordance with EN55032
- Class B
- Vibration resistance IEC 60068-2-6
- 2.3 g
- Interference immunity test acc. to
- EN 55024, EN 55032, IEC61000-3-2,-3, IEC61000-4-2,-3,-4,-5,-6,-8,-11
- Shock resistance IEC 60068-2-27
- 30 g in all directions
Input
- AC current consumption
- 1.5 A @ 230 V AC / 3 A @ 115 V AC
- AC input voltage range
- 85…277 V AC
- Connection system
- Screw connection
- DC current consumption
- 1,5A @ 370 VDC / 3A @ 120 VDC
- DC input voltage range
- 80...370 V DC
- Frequency range AC
- 45…65 Hz
- Input fuse (internal)
- Yes
- Inrush current
- max. 15 A
- Rated input voltage
- 100...240 V AC (wide-range input)
- Recommended back-up fuse
- 10 A, Char. B circuit breaker, 6...8 A, char. C circuit breaker
- Standby power consumption, max.
- 1 W
- Surge protection
- Varistor
Classifications
- ETIM 6.0
- EC002540
- ETIM 7.0
- EC002540
- EClass 9.0
- 27-04-07-01
- EClass 9.1
- 27-04-07-01
- EClass 10.0
- 27-04-07-01
Output
- Connection system
- Screw connection
- Continous output current @ U
- 12 A @ 45°C, 7,5 A @ 70°C
- Current capacity (pulse) @ U
- 30 A (2ms)
- Nominal output current for U
- 10 A @ 60 °C
- Output power
- 240 W
- Output voltage
- 22.5...29.5 V (adjustable via potentiometer)
- Parallel connection option
- yes, max. 5
- Protection against inverse voltage
- Yes
- Rated output voltage
- 24 V DC ± 1 %
- Reserve capacity @ U
- 12 A (1 min), 15 A (4s)
- Residual ripple, breaking spikes
- < 50 mVss @ UNenn, Full Load
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Humidity at operating temperature
- 5...95 %, no condensation
- Insulation voltage input / earth
- 3.5 kV
- Insulation voltage output / earth
- 0.5 kV
- Insulation voltage, input/output
- 4 kV
- Pollution severity
- 2
- Protection class
- I, with PE connection
- Surge voltage category
- III
Connection Data (Output)
- Conductor cross-section, AWG/kcmil , max.
- 10
- Conductor cross-section, AWG/kcmil , min.
- 26
- Conductor cross-section, flexible , max.
- 4 mm²
- Conductor cross-section, flexible , min.
- 0.22 mm²
- Conductor cross-section, rigid , max.
- 6 mm²
- Conductor cross-section, rigid , min.
- 0.18 mm²
- Connection system
- Screw connection
- Number of terminals
- 8 (++,---,11,13,14)
- Screwdriver blade
- 0.8 x 4.0, PZ 1
- Tightening torque, max.
- 0.6 Nm
- Tightening torque, min.
- 0.5 Nm
Temperatures
- Humidity at operating temperature
- 5...95 %, no condensation
- Operating temperature, max.
- 70 °C
- Operating temperature, min.
- -25 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -25 °C...70 °C
- Storage temperature
- -40 °C...85 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E258476
