- [Us] Rated Supply Voltage
- 200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
- Network Frequency
- 47.5...63 Hz
- Type Of Cable
- shielded motor cable 0-55 °C) copper
- Discrete Input Logic
- positive or negative CN1)
- Height
- 150 mm
- Output Current 3S Peak
- 7.8 A 220 V
- Electrical Isolation
- between power and control
- Physical Interface
- RS485 Modbus Serial line slave
- Product Compatibility
- servo motor BCH2 60 mm, 2 400 W || servo motor 80 mm, 1 400 W || servo motor 130 mm, 1 300 W
- Status Led
- 1 LED (Red) DC bus energized || 1 LED (multi-colour) N.RUN || 1 LED (multi-colour) N.ERR || 2 LEDs (Green) Link (Link Status) || 2 LEDs (Yellow) activity
- Discrete Output Number
- 5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
- Discrete Input Voltage
- 24 V DC logic
- Transmission Rate
- 100 Mbit/s EtherCAT
- Discrete Output Voltage
- 12...24 V DC
- Discrete Input Number
- 8 programmable CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
- Signalling Function
- servo status and fault codes five 7-segment display units
- Marking
- CE || cULus
- Output Current 3S Peak 2
- 7.8 A 220 V
- Connector Type
- RJ45 CN4)EtherCAT
- Phase
- single or three phases
- Net Weight
- 1 kg
- Output Current 3S Peak 3
- 7.8 A 220 V
- Communication Interface
- EtherCAT, Integrated
- Electrical Connection
- spring terminal 0.82...1 mm², AWG 18 L1-L2) || spring terminal 0.82...1 mm², AWG 18 R, S, T) || spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) || spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
- Switching Frequency
- 16 kHz
- Discrete Output Logic
- positive or negative CN1)
- Type Of Cooling
- fan
- Supply Voltage Limits
- 200-255 V three phase || 170-255 V single phase
- Method Of Access
- slave
- Control Signal Type
- servo motor encoder feedback CN2
- Safety Function
- STO (safe torque off), Integrated
- Output Voltage
- <= power supply voltage
- Operating Position
- vertical
- Emc Filter
- without EMC filter
- Maximum Leakage Current
- 1.3 mA
- Width
- 55 mm
- Overvoltage Category
- III
- Depth
- 146 mm
- Nominal Power
- 0.4 kW 220 V 16 kHz
- Continuous Output Current
- 2.6 A 16 kHz
- Protection Type
- against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
- Continuous Power
- 400 W 220 V
- Supply Frequency
- 50/60 Hz - 5...5 %
- Safety Level
- SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012