RM35ATW5MW

Specifications

Minimum Switching Current

10 mA 5 V DC

Range Of Product

Harmony Control Relays

Switching Capacity In Va

1250 VA

Product Or Component Type

temperature control relay

Utilisation Category

AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1

Relay Name

RM35AT

Time Delay Range

0.1...10 s adjustable 0...10 % of the full scale value)

Relay Type

temperature control relays

Product Specific Application

for elevator machine rooms and 3-phase supplies

Relay Monitored Parameters

phase sequence || phase failure detection || undertemperature: -1...11°C || overtemperature: 34...46°C

Maximum Power Consumption In Va

3.5 VA AC

Contractual warranty

Warranty

18 months

Complementary

Temperature Probe Type

Pt 100 - 3-wire

Insulation Resistance

> 500 MOhm 500 V DC between supply and relay output IEC 60255-5 || > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 || > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 || > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 || > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 || > 1 MOhm 500 V DC between supply and measurement IEC 60664-1

[Us] Rated Supply Voltage

24...240 V AC/DC

Operating Rate

<= 360 operations/hour full load

Status Led

1 LED Green power ON || 1 LED Yellow correct temperature (high R1)/(low R2) || 1 LED Yellow phases of relay

Output Contacts

2 NO

Contacts Material

cadmium free

Installed Device

Pt 100 probe cable length <= 10 m

Reset Time

8 s

Marking

CE : EMC 89/336/EEC || CE : 73/23/EEC

Response Time

<= 3.5 s + Tt (in case of temperature fault) || 500 ms (in case of 3-phase fault) || 500 ms (on disappearance of fault)

Operating Position

any position without derating

Maximum Switching Voltage

250 V AC/DC

Connections - Terminals

screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end

[Ui] Rated Insulation Voltage

400 V IEC 60664-1

Overvoltage Category

III IEC 60664-1

Supply Voltage Limits

20.4-264 V AC || 21.6-264 V DC

Mounting Support

35 mm symmetrical DIN rail conforming to EN/IEC 60715

Nominal Output Current

5 A

Mechanical Durability

30000000 cycles

Housing Material

self-extinguishing plastic

Resistance Across Terminals

600 kOhm 3-phase || 1.33 kOhm temperature

Control Circuit Voltage Limits

10 % + 10 % Un DC || - 15 % + 10 % Un AC

Measurement Accuracy

+/- 2 °C

Width

35 mm

Tightening Torque

0.6-1 N.m IEC 60947-1

Maximum Power Consumption In W

0.6 W DC

Electrical Durability

100000 cycles

Run-Up Delay At Power-Up

0.2 s

Supply Frequency

50/60 Hz +/- 10 %

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1504008EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI1504008EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Environment

Product Certifications

GL || UL || C-tick || CSA || GOST

Ambient Air Temperature For Operation

-20-50 °C

Standards

NF EN 60255-6 || IEC 60255-6

Immunity To Microbreaks

10 ms

Dielectric Test Voltage

2 kV AC 50 Hz, 1 min

Electromagnetic Compatibility

emission standard for industrial environments EN/IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments EN/IEC 61000-6-3 || immunity for industrial environments NF EN/IEC 61000-6-2

Shock Resistance

15 gn 11 ms IEC 60255-21-1

Vibration Resistance

0.35 mm 5-57.6 Hz)IEC 60068-2-6/IEC 60255-21-1 || 1 gn 57.6-150 Hz)IEC 60068-2-6/IEC 60255-21-1

Ip Degree Of Protection

IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)

Pollution Degree

3 IEC 60664-1

Ambient Air Temperature For Storage

-40-70 °C

Non-Dissipating Shock Wave

4 kV

Modele CAD

traceparts

Pobierz