280-995

Additional Information

Part Number

280-995

UPC

4044918395717

Tariff Code

85369010000

ETIM

Group Code : EG000012

Group Description : Terminal blocks

Class Description : Feed-through terminal block

Class Code : EC000897

Version : 7

Ratings Per Iec/En

Ratings per

IEC/EN 60947-7-1

Environmental Requirements

Processing temperature

-35 … +85 °C

Continuous operating temperature

-60 … +105 °C

Physical Data

Width

5 mm / 0.197 inches

Height

75 mm / 2.953 inches

Depth from upper-edge of DIN-rail

28 mm / 1.102 inches

Material Data

Note (material data)

<a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>

Color

Light gray

Material group

I

Insulation material

Polyamide (PA66)

Flammability class per UL94

V0

Fire load

0.141 MJ

Weight

8.184 g

Mechanical Data

Design

Horizontal type

Mounting type

DIN-35 rail

Marking level

Center marking

Specifications

Product Group Code

0001

Commercial Data

Packaging type

Box

Country of origin

DE

GTIN

4044918395717

Customs tariff number

85369010000

Notes

Safety information

Notice: This double potential terminal block cannot be commoned via adjacent jumpers.

Ex Information

Reference hazardous areas

See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”

Rated voltage EN (Ex e II)

550 V

Rated current (Ex e II)

20 A

Power Loss

Power loss, per pole (potential)

0.532 W

Rated current IN for specified power loss

20 A

Resistance value for specified, current-dependent power loss

0.00133 Ω

Connection 1

Connection technology

CAGE CLAMP®

Actuation type

Operating tool

Connectable conductor materials

Copper || Aluminum

Connectable conductor materials (note)

Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A

Solid conductor

0.08 … 2.5 mm² / 28 … 12 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 12 AWG

Note (conductor cross-section)

12 AWG: THHN, THWN

Strip length

8 … 9 mm / 0.31 … 0.35 inches

Wiring direction

Front-entry wiring