Weidmuller
2619120000
VPU AC I 1 R 440/25 LCF
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Offer with manufacturer lead time
Ships in:On Request
Best price:
€104.24
Additional Information
- Part Number
- 2619120000
General Data
- Altitude
- ≤ 2000 m
- Colour
- black
- Design
- Installation housing; 2TE, Insta IP 20
- Optical function display
- green = OK; red = arrester is defective - replace
- Protection degree
- IP20 in installed state
- Rail
- TS 35
- Segment
- Power distribution
- Suitable for
- Count-in installation (leakage current free)
- UL 94 flammability rating
- V-0
- Version
- Surge protection, with remote contact
Approvals
- Approvals
- CE
- ROHS
- Conform
Insulation Coordination Acc. To En 50178
- Pollution severity
- 2
- Surge voltage category
- III
Rated Data Iec / En
- Discharge current I
- 25 kA
- Energy coordination (≤10 m)
- Type I, Type II, Type III
- Follow-on current extinguishing capability I
- Not available due for technical reasons
- Frequency range, max.
- 60 Hz
- Frequency range, min.
- 50 Hz
- Fuse
- 250 A gL (if back up fuse > 250 A)
- Leakage current at U
- 5 µA
- Lightning test current I
- 25 kA
- Low voltage network
- Single-phase, TN, TN-S
- Max. continuous voltage, Uc (AC)
- 440 V
- Number of poles
- 1
- Protection level U
- ≤ 2.5 kV
- Rated load current I
- 100 A
- Rated voltage (AC)
- 400 V
- Requirements category acc. to IEC 61643-11
- Type I, Type II
- Requirements class, acc. to EN 61643-11
- T1, T2
- Response time
- ≤ 25 ns
- Short-circuit current rating I
- 50 kA
- Signalling contact
- 250 V 1A 1CO
- Standards
- IEC61643-11, EN61643-11, EN 60068-2-27:2009, EN 60068-2-64:2008, EN 60068-2-6:2008
- Suitable for
- Count-in installation (leakage current free)
- Temporary surge voltage (over-voltage) - TOV
- 762 V
- Voltage type
- AC
Dimensions And Weights
- Width
- 36 mm
- Width (inches)
- 1.417 inch
- Height
- 106 mm
- Height (inches)
- 4.173 inch
- Depth
- 93 mm
- Depth (inches)
- 3.661 inch
- Net weight
- 25 g
Connection Data
- Wire connection method
- Screw connection
- Type of connection
- Screw connection
- Stripping length, rated connection
- 13 mm
- Tightening torque, min.
- 2 Nm
- Tightening torque, max.
- 3 Nm
- Clamping range, rated connection
- 16 mm²
- Clamping range, min.
- 6 mm²
- Clamping range, max.
- 35 mm²
- Wire cross-section, solid, min.
- 6 mm²
- Wire cross-section, solid, max.
- 35 mm²
- Wire connection cross-section, finely stranded, min.
- 6 mm²
- Wire connection cross section, finely stranded, max.
- 35 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.
- 6 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.
- 35 mm²
- Connection cross-section, stranded, min.
- 6 mm²
- Connection cross-section, stranded, max.
- 35 mm²
Classifications
- ETIM 6.0
- EC000941
- ETIM 7.0
- EC000941
- EClass 9.0
- 27-13-08-05
- EClass 9.1
- 27-13-08-05
- EClass 10.0
- 27-13-08-05
- UNSPSC
- 30-21-19-22
Connection Data, Remote Alert
- Connection type
- Screw connection, pluggable
- Stripping length
- 8 mm
- Cross-section for connected wire, solid core, min.
- 0.14 mm²
- Cross-section for connected wire, solid core, max.
- 1.5 mm²
Temperatures
- Humidity
- 5 - 95% rel. humidity
- Operating temperature, max.
- 85 °C
- Operating temperature, min.
- -40 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -40 °C...85 °C
- Storage temperature
- -40 °C...85 °C
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther