Wyszukiwarka produktów

This Harmony RSL slim interfacing plug-in relay has a coil control voltage of 24V DC and has 1 changeover contact SPDT (single pole double throw) with a rating of 6A. It has large choice of number of contacts for high rated current use. It also offers LED indicator and protection circuit. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. One of the slimiest interface relay on the market, with 6mm width, it can be installed nearly anywhere. It is compatible with high breaking capacity or low-level current application requirements. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0 0

This product is part of the Lexium T, P range, an offer of secondary arms with rolls. This secondary arm with rolls, sockets and 4 springs. It weighs 1.75kg. It is compatible with Delta robot P4. The kit includes 4x springs. Lexium T, P delta robots for pick and place solutions. Lexium Delta 2 and Delta 3 robots are designed for fast pick-and-place with payloads of up to 60kg (Delta 2) and 15kg (Delta 3).

This product is part of the Lexium T, P range, an offer of gearboxes. The gear box for the main axis with fasteners and indexing bolt. It is compatible with Delta robot P4, Delta robot P5, Delta robot P6, Delta robot P6 extended and Delta robot P2. The kit includes 1 gearbox main axis, 16x screws, 4x screws, 16x washers, 1 indexing bolt gearing, 1 quad ring and 1 grounding cap. Lexium T, P delta robots for pick and place solutions. Lexium Delta 2 and Delta 3 robots are designed for fast pick-and-place with payloads of up to 60kg (Delta 2) and 15kg (Delta 3).

Grippers with angular finger opening from 30 to -10 make the MHC2 suitable for workpieces of odd shapes and where space is too tight to accommodate a parallel type gripper.

The MHZ2 Series gripper has an integrated linear guide for high rigidity, positioned with two dowel pins to prevent guide slippage. It has mounting versatility on three sides, in five configurations. Available in single acting (N.O., N.C.) and double acting.

BAHCOFIT Screwdriver Flexible Magnetic Puller 20 x 16 x 3/8

Designed for applications that require a wide range of travel for gripping many different sized workpieces; the MHL2 Series finger motion is synchronized by a rack-and-pinion mechanism. The double piston construction creates a compact gripper with a large holding force.

The MRHQ series is a rotary gripper suitable for holding and reversing work pieces on transfer lines. The compact integration of gripping and rotating functions eliminates the peripheral piping and wiring of the previous product (rotary table + adapter + air gripper). The length of the MRHQ series has been reduced by approximately 20% compared with the previous products.

The MHZ2 Series gripper has an integrated linear guide for high rigidity, positioned with two dowel pins to prevent guide slippage. It has mounting versatility on three sides, in five configurations. Available in single acting (N.O., N.C.) and double acting.