Kategorien
Zurück zu:Alle KategorienFilter
RIDERSERIES RCM, Relay module, Number of contacts: 2 CO contact with test button AgNi 90/10, Rated control voltage: 230 V AC, Continuous current: 12 A, Screw connection
RIDERSERIES RCM, Relay module, Number of contacts: 2 CO contact with test button AgNi 90/10, Rated control voltage: 230 V AC, Continuous current: 12 A, Screw connection
CHARX connect, AC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 480 V (AC), C-Line, housing: black, gray, PHOENIX CONTACT logo, cable: 10 m, black, straight, NOTE: Signal transmission is dependent on the cable length and may be adversely affected.
CHARX connect, AC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with alternating current (AC) via type 2 vehicle charging inlets, with protective cap, Type 2, IEC 62196-2, 32 A / 480 V (AC), C-Line, housing: black, gray, PHOENIX CONTACT logo, cable: 10 m, black, straight, NOTE: Signal transmission is dependent on the cable length and may be adversely affected.
Cable gland, cable gland material: Nickel-plated brass, application: Ex, external cable diameter 5 mm ... 10 mm, shielding: no, connecting thread: M16 x 1.5, color: silver, with O-ring
Cable gland, cable gland material: Nickel-plated brass, application: Ex, external cable diameter 5 mm ... 10 mm, shielding: no, connecting thread: M16 x 1.5, color: silver, with O-ring
Accessories for plotters with engraving unit
Accessories for plotters with engraving unit
HDC enclosures, Size: 3, Protection degree: IP65, Open base, End-locking clamp, lower side, Standard
HDC enclosures, Size: 3, Protection degree: IP65, Open base, End-locking clamp, lower side, Standard
Sensor/actuator line, Connecting line, M12 / M12, Number of poles : 4, 1 m, pin, straight - socket, straight, Shielded: No, LED: No, Sheath material: PUR, Halogen: No
Sensor/actuator line, Connecting line, M12 / M12, Number of poles : 4, 1 m, pin, straight - socket, straight, Shielded: No, LED: No, Sheath material: PUR, Halogen: No
Feed-through terminal, PUSH IN, 2.5 mm², 800 V, 24 A, yellow
Feed-through terminal, PUSH IN, 2.5 mm², 800 V, 24 A, yellow
PE terminal, Screw connection, 35 mm², 4200 A (35 mm²), Green/yellow
PE terminal, Screw connection, 35 mm², 4200 A (35 mm²), Green/yellow
Printed circuit board terminals, 3.81 mm, Number of poles: 8, 135°, Solder pin length (l): 3.5 mm, black, PUSH IN, Clamping range, max. : 1.5 mm², Tube
Printed circuit board terminals, 3.81 mm, Number of poles: 8, 135°, Solder pin length (l): 3.5 mm, black, PUSH IN, Clamping range, max. : 1.5 mm², Tube
