Filter
Overload relay 3...12 a for motor protection size s00, class 20 contactor ass. main circuit screw conn. aux.circuit screw conn. manual-autom.-reset
Overload relay 3...12 a for motor protection size s00, class 20 contactor ass. main circuit screw conn. aux.circuit screw conn. manual-autom.-reset
CONTACTOR RELAY FOR RAILWAY, 2NO+1NC, DC 110V, 0,7..1,25*US, W/VARISTOR INTEGRATED, 3-POLE, SZ S00, SPRING-LOADED TERMINAL
CONTACTOR RELAY FOR RAILWAY, 2NO+1NC, DC 110V, 0,7..1,25*US, W/VARISTOR INTEGRATED, 3-POLE, SZ S00, SPRING-LOADED TERMINAL
Contactor relay latched, 2NO+2NC, DC 24V, size s00, screw terminal
Contactor relay latched, 2NO+2NC, DC 24V, size s00, screw terminal
Contactor, AC-3, 5.5KW/400V, 1NC, AC 24V, 50/60 HZ, 3-pole, sz s00 screw terminal
Contactor, AC-3, 5.5KW/400V, 1NC, AC 24V, 50/60 HZ, 3-pole, sz s00 screw terminal
Contactor, AC-3, 5.5KW/400V, 2NO+2NC, DC 24V, w. integrated diode 3-pole, sz s00 screw terminal permanent aux. switch for suva applications
Contactor, AC-3, 5.5KW/400V, 2NO+2NC, DC 24V, w. integrated diode 3-pole, sz s00 screw terminal permanent aux. switch for suva applications
Contactor, AC-3, 4KW/400V, 1NO+1NC, DC 24V, 3-pole, sz s0 spring-loaded terminal
Contactor, AC-3, 4KW/400V, 1NO+1NC, DC 24V, 3-pole, sz s0 spring-loaded terminal
Contactor,AC3 22KW/400V, 1NO+1NC, 110V AC 50/60HZ, 3-pole, size s2, screw terminal
Contactor,AC3 22KW/400V, 1NO+1NC, 110V AC 50/60HZ, 3-pole, size s2, screw terminal
Load disconnector 3LD3, Iu 40 AMain switch 3-pole + N Ratedoperating capacity at AC-23 Aat 400 V 18.5 kW Front platemounting Basic switch withCentral hole mounting 22.5mmToggle drive red / yellow 48x48
Load disconnector 3LD3, Iu 40 AMain switch 3-pole + N Ratedoperating capacity at AC-23 Aat 400 V 18.5 kW Front platemounting Basic switch withCentral hole mounting 22.5mmToggle drive red / yellow 48x48
SENTRON, Molded case switch3LD5 UL, Main switch, 3-pole,certified according to UL489UL60947-4-1 and IEC60947-3, UL:100A, SCCR 65kA at 480VAC,Operating power at 480VAC3-phase: 60hp, IEC: 100A,
SENTRON, Molded case switch3LD5 UL, Main switch, 3-pole,certified according to UL489UL60947-4-1 and IEC60947-3, UL:100A, SCCR 65kA at 480VAC,Operating power at 480VAC3-phase: 60hp, IEC: 100A,
The MOLEX industrial automation product component number 22057088 is a high-quality, reliable solution for industrial automation applications. Designed with precision engineering and advanced technology, this component offers outstanding performance and durability in even the most demanding environments. With its rugged construction and superior electrical properties, it is ideal for use in a wide range of industrial applications, including manufacturing, assembly, and control systems. Whether you require high-speed data transfer, precise motion control, or advanced sensing capabilities, this MOLEX component delivers the performance and reliability you need to keep your operations running smoothly. So if you're looking for a top-quality industrial automation product that can meet your most demanding requirements, look no further than MOLEX 22057088.
The MOLEX industrial automation product component number 22057088 is a high-quality, reliable solution for industrial automation applications. Designed with precision engineering and advanced technology, this component offers outstanding performance and durability in even the most demanding environments. With its rugged construction and superior electrical properties, it is ideal for use in a wide range of industrial applications, including manufacturing, assembly, and control systems. Whether you require high-speed data transfer, precise motion control, or advanced sensing capabilities, this MOLEX component delivers the performance and reliability you need to keep your operations running smoothly. So if you're looking for a top-quality industrial automation product that can meet your most demanding requirements, look no further than MOLEX 22057088.
SENTRON, Switch disconnector 3LD, change-over switch, 3-pole, Iu: 100 A, Operating power / at AC-23 A at 400 V: 37 kW, front-mounted, knob- operated mechanism, black, 4-hole mounting of the handle
SENTRON, Switch disconnector 3LD, change-over switch, 3-pole, Iu: 100 A, Operating power / at AC-23 A at 400 V: 37 kW, front-mounted, knob- operated mechanism, black, 4-hole mounting of the handle
TeSys K control relay, 4 contacts (2NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).
TeSys K control relay, 4 contacts (2NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 42 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 42 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 110V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).
TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 110V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.