Produkt-Suche

CB UL489 2-POLE 8A D-TRIP TYPE HSJ

3LD switch 3P 160A Front Mount Knob Mech., Black 4 Hole mounting

DISC SWTCH 3P R/Y ROTARY 100A DINRL BASE ROTARY ACTUATOR RED/YELLOW MOUNTING RAIL/TWO-HOLE MOUNTING BASE MOUNTING IU=100, P/AC-23A AT 400V=37KW EMGNCY MAIN CNTRL SWITCH 3-POLE

SIEMENS LOW VOLTAGE 3VA IEC MOLDED CASE CIRCUIT BREAKER WITH ELECTRONIC TRIP UNIT. 3VA20 FRAME WITH HIGH (CLASS H) BREAKING CAPACITY. 25A 4-POLE Icu: (2KAIC AT 690V) (85KAIC AT 415V). ETU350 TRIP UNIT LSI. SPECIAL FEATURES: CONNECTION WITH LUG TERMINAL / NUT KEEPER. DIMENSIONS (W x H x D) IN: 5.5 x 7.1 x 4.2.

CIRCUIT BREAKER 230V 6KA, 1+N-POLE, C, 6A

HANDLE LOCKING DEVICE,RED Padlock,for use with 5SP4, 5SY4, 5SY5 Supplementary Protectors

SUPPLEMENTARY PROTECTOR,4P,40A,CURVE C Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 4 Pole, 40 Amps, 480 VAC, Trip Characteristic Curve C, 72mm Width,70mm Depth, UL File E116386 in Vol. 1 Sec. 2

CIRCUIT BREAKER 400V 25KA, 3POLE, C, 32A, D=70MM

Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.

1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.

This Multi9 C60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 16A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. Its fast closing mechanism, overvolatge resistance and high performance limitation improve its service life. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 81mm x (D) 72mm. The weight is 0.36kg. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

This product is part of the CANopen range, an offer of connection components. This CANopen preassembled cable is an accessory of stepper drives and motors. The length of this cable is 1m. It is furnished with 1 RJ45 connector in one end and 9-way D-Sub (DE-09) female with integrated line terminator in another end. It weighs 0.077kg. This preassembled cable is suitable for use with CANopen bus. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution.

This Harmony XVLZ912 is an IP65 seal for diameter 12mm pilot light. It is part of the range Harmony XVL diameter 8-12 mm plastic pilot lights.

The LA4DBL is an industrial automation product manufactured by Schneider Electric. It is a time-delay block that is designed to provide precise timing control for a range of industrial applications. The LA4DBL features a compact design, making it easy to install in tight spaces, and is built to withstand harsh industrial environments. With a delay time range of 0.1 seconds to 180 hours, the LA4DBL is ideal for controlling various processes, including motor control, valve control, and lighting control. The product is manufactured to the highest quality standards, ensuring long-term reliability and durability. The LA4DBL is a versatile and cost-effective solution for industrial automation applications, making it an essential component in any industrial control system.

This terminal is an accessory of soft start / soft stop Altistart 48 range. Setting the new industry standard for soft starts, the Altistart 48 controls the applied motor torque, making it ideal for a wider variety of applications than a traditional voltage ramp soft start with the current limit. In pumping applications, the Altistar 48 with TCS eliminates the long start and stop times, the hydraulic transients and slamming of check valves associated with "pump version" voltage ramp soft starts. Every ATS 48 soft start model is rated for all North American industrial and commercial voltages (208, 240, 480, and 600V). It is equipped with a 3m connection cable, with 9-way SUB-D connectors at the terminal end and RJ45 at the Altistart 48 end. Networking for remote monitoring and control using Modbus, Ethernet, DeviceNet, and other protocols. Alistart 48 is accepted internationally: Meets UL, CSA, CE, NOM, CCC, C-Tick, GHOST, and DNV. It is used to set and configure the soft start/soft stop unit remotely and display the soft start/soft stop unit status and detected errors remotely.

Undervoltage release, AC 400v/50HZ, AC 440v/60HZ w. screw connection for circuit-breakers, sz s00/s0

Circuit-breaker sz s00, for motor protection, class 10, w. overload relay function a-release 3.5...5a, n-release 65a, screw connection, standard sw. capacity

MOVING PART FOR C.BREAKER SACE EMAX2 E1.2C 630 THREE-POLE WITH SOLID-STATE RELEASE IN AC EKIP/DIP-LSI R 630 FITTED WITH: 4 AUXILIARY CONTACT AND C.BREAKER IN POSITION OPEN-CLOSED

C.BREAKER SACE EMAX2 E2.2B 1600 FIXED FOUR-POLE WITH TERMINALS REAR HORIZONTAL AND SOLID-STATE RELEASE IN AC EKIP/HI-TOUCH-LSI R 1600 FITTED WITH: 4 AUXILIARY CONTACT AND C.BREAKER IN POSITION OPEN-CLOSED

C.BREAKER SACE EMAX2 E2.2H 1600 FIXED THREE-POLE WITH TERMINALS REAR HORIZONTAL AND SOLID-STATE RELEASE IN AC EKIP/TOUCH-LI R 1600 FITTED WITH: 4 AUXILIARY CONTACT AND C.BREAKER IN POSITION OPEN-CLOSED