Produkt-Suche

This product is part of the Lexium range, an offer of motion servo drives and servo motors. This control cable is an accessory of encoder. The length of this cable is 20m. It is furnished with M23 connector, RJ45 connector for electrical connection. The cable composition is 3 x (2 x 0.14mm²) + (2 x 0.34mm²). It is used to connect from servo motor to servo drive. It weighs 1.4kg. This product is compatible with Lexium 32 SinCos Hiperface encoder.

SIMATIC NET INDUSTRIAL ETHERNET INSERT 2 FE F. MODULAR OUTLET BASE MODULE, REPL. INSERT WITH 2 X 100 MBIT RJ45 INTERFACE, 1 PACK = 4 PCS

ADAPTER SCREW FOR DIAZED FUSE BASE,10A SIZE DII/THREAD E27, 10A D-TYPE ADAPTER SCREW

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 16 A (see derating curve), rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MSTB 2,5 HC/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5 HC, locking: without, mounting: without, type of packaging: packed in cardboard

Tool sample set

Screw bit, slotted, E6.3-1/4" drive, size: 1 mm x 4 mm x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173

Energy storage device, lead AGM, VRLA technology, 24 V DC, 1.2 Ah.

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 4, number of rows: 1, number of positions: 4, number of connections: 4, product range: MVSTBW 2,5/..-ST, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: -90 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

D-SUB sleeve housing, shell size 2, IP67 degree of protection

Replacement processing insert 1.5 mm², for the crimping device CF 3000-2,5

Two-hand ring cable cutter, with ratchet function, for copper and aluminum up to 45 mm diameter (up to 300 mm²)

Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip

TeSys D replacement coil 48V AC 50/60Hz, for TeSys D contactors. To be used with 3 and 4-pole contactors LC1D09 to D38 and LC1DT20, DT40. It operates in the voltage limits 0.8-1.1 Uc (50Hz), 0.85-1.1 Uc (60Hz) and environments until 60°C Green Premium compliant (RoHS/REACh).

This product is part of the CANopen range, an offer of connection components. This CANopen preassembled cable is an accessory of stepper drives and motors. The length of this cable is 1m. It is furnished with 1 RJ45 connector in one end and 9-way D-Sub (DE-09) female with integrated line terminator in another end. It weighs 0.077kg. This preassembled cable is suitable for use with CANopen bus. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution.

This Magelis XBTZ is a RS 485 cable for Modbus serial link. It is equipped with one male RJ45 connector at each end. it is 2.5 meters long. It enables direct connection between Magelis XBT terminals and PLCs.