BMXAMO0410
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Additional Information
- Part Number
- BMXAMO0410
- UNSPSC
- 32151705
- Tariff Code
- 8538908180
- Country of Origin
- FR
Environment
- Product Certifications
- CE || RCM || CSA || EAC || Merchant Navy || UL
- Ambient Air Temperature For Operation
- 0-60 °C
- Standards
- EN/IEC 61010-2-201 || EN/IEC 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201
- Shock Resistance
- 30 gn
- Vibration Resistance
- 3 gn
- Directives
- 2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
- Ambient Air Temperature For Storage
- -40-85 °C
- Relative Humidity
- 5-95 % 55-55 °C without condensation
- Ip Degree Of Protection
- IP20
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Mtbf Reliability
- 1000000 H
- Fallback Mode
- configurable || predefined
- Measurement Error
- <= 0.2 % of full scale 0...60 °C || 0.1 % of full scale 25 °C
- Maximum Conversion Value
- 0...21 mA 0...20 mA || 0...21 mA 4...20 mA || +/- 10.5 V +/- 10 V
- Status Led
- 1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
- Temperature Drift
- 45 ppm/°C +/- 10 V || 45 ppm/°C 0...20 mA || 45 ppm/°C 4...20 mA
- Analogue Output Type
- current 0...20 mA || current 4...20 mA || voltage +/- 10 V
- Common Mode Rejection
- 100 dB
- Output Level
- high level
- Supply
- internal power supply via rack
- Current Consumption
- 150 mA 3.3 V DC || 140 mA 24 V DC
- Minimum Crosstalk Attenuation
- 80 dB
- Net Weight
- 0.15 kg
- Isolation Voltage
- 1400 V DC between channels and ground || 1400 V DC between channels and bus || 750 V DC between channels
- Analogue Output Number
- 4
- Power Consumption In W
- 3 W 24 V DC typical || 3.6 W 24 V DC maximum || 0.45 W 3.3 V DC typical || 0.51 W 3.3 V DC maximum
- Load Impedance Ohmic
- >= 1000 Ohm +/- 10 V || <= 500 Ohm 0...20 mA || <= 500 Ohm 4...20 mA
- Detection Type
- open circuit 0...20 mA || open circuit 4...20 mA || short circuit +/- 10 V
- Operating Altitude
- 0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
- Analogue Output Resolution
- 15 bits + sign
- Conversion Time
- <= 1 ms
Specifications
- Range Of Product
- Modicon X80
- Product Or Component Type
- analog output module
- Electrical Connection
- 20 ways 1 connector
- Input Output Isolation
- isolated
Dokumente
Data Sheet
HerunterladenÄhnliche Produkte
Zusätzliche Informationen
Schneider Electric BMXAMO0410 is a high-performance industrial automation module designed for use in a wide range of applications. This 4-axis stepper motor controller is ideal for controlling multiple motors simultaneously, allowing for precise control and rapid response times. It features a wide range of input/outputs, allowing it to be integrated into almost any system.
The BMXAMO0410 is equipped with a powerful 32-bit microprocessor and advanced motor control algorithms. It is designed to operate efficiently in harsh industrial environments, with an operating temperature range from -10°C to +55°C. It has an integrated safety system that monitors the motor signals and reacts quickly if an anomaly is detected.
The BMXAMO0410 is a robust and reliable solution for industrial automation applications. It is easy to install and configure, and can be integrated into most existing control systems. With its high-performance features, it is the perfect choice for applications that require fast and accurate control of multiple motors.