Schneider Electric
BMXSDI1602
1 / 2
Beschreibung
Aktiv Reif
This cord set is part of the Modicon X80 range, an offer of common modules and installation accessories for M580 and M340 automation platforms. This discrete input module offers 16 inputs with positive discrete input logic. It is a module with discrete input voltage of 24V DC with current sink positive logic. It is the Modicon digital input module dedicated to M580 safety systems. It features 16 Type 3 inputs, in two groups of 8 non-isolated inputs. It is an IP20 rated product. It weighs 0.115kg. It is suitable for safety most demanding applications. This product is certified by CE and UL, and also by ATEX and IECEx for use in explosive atmospheres. It complies up to SIL 3, Category 4, PLd. It is to be used with BMXFTB2000 caged terminal block. The I/O module height is larger than the height of a rack (Ethernet or X-bus) and should be considered before installing the rack. It can be installed either in a local or a remote rack. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock. The Modicon X80 range is one important part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe and secure architecture.- Country of Origin
- FR
- Part Number
- BMXSDI1602
- Tariff Code
- 85389099
- EAN
- 3606481204912
- UNSPSC
- 26101205
€1,169.10
net€1,299.00
Kostenloser Versand!1
Zahlungsmethoden:
- Bestes Angebot von:
Vertrauenswürdiger Automa.Net Lieferant- Verfügbarkeit:
- 2 Stk.Auf LagerAktualisiert am: 09-11-2024
- Garantie:
- 24 Monate
- Geschätzte Lieferung:
- 12-13 November zu Vereinigtes Königreich
- Zustand:
- Neu versiegelt ab Werk
Neu versiegelt ab Werk - Ein brandneuer, unbenutzter, ungeöffneter, unbeschädigter Artikel in seiner original vom Hersteller versiegelten Verpackung.
Versandinformationen
Sicherer Zahlungsprozess
Rückgabe- und Erstattungsrichtlinien
Versandrichtlinien
Garantiebedingungen
Environment
- Ambient Air Temperature For Operation
- -25-60 °C
- Shock Resistance
- 15 gn
- Environmental Characteristic
- gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2
- Dielectric Strength
- 1500 V AC 50/60 Hz 1 minute, primary/secondary
- Vibration Resistance
- 3 gn
- Ambient Air Temperature For Storage
- -40-85 °C
- Relative Humidity
- 5-95 % 55-55 °C without condensation
- Operating Altitude
- 0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
- Protective Treatment
- conformal coating
- Ip Degree Of Protection
- IP20
Specifications
- Range Of Product
- Modicon X80
- Discrete Input Voltage
- 24 V DC positive
- Product Or Component Type
- discrete input module
- Input Type
- current sink (logic positive)
- Discrete Input Type
- not isolated
- Discrete Input Number
- 16
- Discrete Input Current
- 3.2 mA
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Mtbf Reliability
- 265000 H
- Voltage Range
- 19...30 V
- Status Led
- 1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O
- Voltage Detection Threshold
- < 14 V DC sensor fault || > 18 V DC sensor OK
- Insulation Resistance
- > 10 MOhm 500 V DC
- Current State 1 Guaranteed
- >= 2 mA
- Protection Type
- reverse polarity protection || external overload protection 0.5 A fast blow
- Power Dissipation In W
- 3.57 W
- Net Weight
- 0.115 kg
- Paralleling Of Inputs
- yes
- Dc Typical Filtering Time
- 6 ms
- Input Compatibility
- with 2-wire/3-wire proximity sensors IEC 60947-5-2
- Typical Current Consumption
- 256 mA 3.3 V DC || 100 mA 24 V
- Current State 0 Guaranteed
- <= 1.5 mA
- Input Impedance
- 7500 Ohm
- Dc Maximum Filtering Time
- 6 ms
