E2E-X2D1-N 2M
Inductive type, Shielded, M8*1mm, DC 2-wire models, Sensing distance 2 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(2 m)
- Consigue plazos de pago de hasta 90 días de 500+ proveedores.
- Descuentos de reventa de hasta el 40%!
Ratings / Performance
- Type
- Shielded
- Sensing method
- Inductive type
- Sensing distance
- 2 mm-10% to +10%
- Setting distance
- 0 to 1.6 mm
- Differential distance
- 15% Max. of sensing distance
- Sensing object
- Ferrous metal (Sensitivity lowers with non-ferrous metals.)
- Standard sensing object
- Iron 8 x 8 x 1 mm
- Power supply voltage
- 12 to 24 VDC ripple(p-p) 10% Max.
- Operating voltage range
- 10 to 30 VDC
- Leakage current
- 0.8 mA max.
- Control output (Output type)
- DC 2-wire models with polarity
- Control output (Switching capacity)
- 3 to 100 mA
- Indicator
- Operation indicator (red), Operation setting indicator (green)
- Operation mode
- NO
- Protective circuit
- Surge suppressor
- Protective circuit
- Output short-cut protection
- Standard or Different frequency
- Standard
- Ambient temperature
- Operating: -25 to 70 °C
- Ambient temperature
- Storage: -40 to 85 °C
- Ambient humidity
- Operating: 35 to 95%RH
- Ambient humidity
- Storage: 3595%RH
- Temperature influence
- +/- 15% Max. of sensing distance in temperature range of -25 to +70 CEL
- Temperature influence
- (As the basis for sensing distance of 23 CEL)
- Voltage influence
- +/- 1% Max. of sensing distance in rated voltage range +/- 15%.
- Voltage influence
- (As the basis for sensing distance at standard power voltage)
- Insulation resistance
- 50 MOhm Min. at 500 VDC between charged parts and the case
- Dielectric strength
- 1000 VAC 50/60 Hz for 1 minute between charged parts and the case
- Vibration resistance
- 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
- Shock resistance
- 500 m/s**2 for 10 times each in X, Y, and Z directions
- Degree of protection
- IEC60529: IP67
- Degree of protection
- Company standard: Oil-proof
- Connection method
- Pre-wired models(Cable length: 2 m)
- Weight (Packed state)
- approx. 60 g
- Material (case)
- Stainless steel (SUS303)
- Material (sensing surface)
- PBT
- Material (clamping nuts)
- Brass nickel plating
- Material (toothed washer)
- Iron zinc plating
- Accessories
- Instruction manual