710206

Current carrying capacity / derating curves

Specification

IEC 61984

Durability tests (B)

Specification

IEC 60512-9-1:2010-03

Contact resistance R1

1.3 mΩ

Insertion/withdrawal cycles

25

Contact resistance R2

1.5 mΩ

Impulse withstand voltage at sea level

4.8 kV

Power-frequency withstand voltage

2.21 kV

Insulation resistance, neighboring positions

> 20 GΩ

Material data - housing

Housing color

green (6021)

Insulating material

PA

Insulating material group

I

CTI according to IEC 60112

600

Flammability rating according to UL 94

V2

Dimensions for the product

Length [ l ]

17.5 mm

Width [ w ]

45.72 mm

Height [ h ]

29.5 mm

Pitch

5.08 mm

Height (without solder pin)

20.2 mm

Solder pin [P]

9.3 mm

Pin dimensions

0.8 x 2.8 mm

Dimensions of slip-on connection

2,8 x 0,8 mm

Mechanical tests (A)

Test specification

IEC 61984

Insertion strength per pos. approx.

8 N

Withdraw strength per pos. approx.

6 N

Polarization when inserted requirement >20 N

Test passed

Contact holder in insert requirements >20 N

Test passed

Pull-out test

Pull-out test

IEC 60999-1:1999-11

Pull-out test

Test passed

Conductor cross section / conductor type / tensile force

0.2 mm² / solid / > 10 N

Conductor cross section / conductor type / tensile force

0.2 mm² / flexible / > 10 N

Conductor cross section / conductor type / tensile force

2.5 mm² / solid / > 50 N

Conductor cross section / conductor type / tensile force

2.5 mm² / flexible / > 50 N

Packaging information

Type of packaging

packed in cardboard

Pieces per package

50

Denomination packing units

Pcs.

Climatic tests (D)

Specification

ISO 6988:1985-02

Cold stress

-40 °C/2 h

Thermal stress

100 °C/168 h

Corrosive stress

0.2 dm³ SO₂ on 300 dm³/40 °C/1 cycle

Impulse withstand voltage at sea level

4.8 kV

Power-frequency withstand voltage

2.21 kV

Air clearances and creepage distances

Clearances and creepage distances

IEC 60664-1:2007-04

Specification

IEC 60664-1:2007-04

Minimum clearance - inhomogeneous field (III/3)

3 mm

Minimum clearance - inhomogeneous field (III/2)

3 mm

Minimum clearance - inhomogeneous field (II/2)

3 mm

Minimum creepage distance value (III/3)

4 mm

Minimum creepage distance value (III/2)

3 mm

Minimum creepage distance value (II/2)

3.2 mm

Material data - contact

Note

WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201

Contact material

Cu alloy

Surface characteristics

Tin-plated

Metal surface contact area (top layer)

Tin (5 - 7 µm Sn)

Metal surface contact area (middle layer)

Nickel (2 - 3 µm Ni),

Metal surface soldering area (top layer)

Tin (5 - 7 µm Sn)

Metal surface soldering area (middle layer)

Nickel (2 - 3 µm Ni)

Ambient conditions

Ambient temperature (storage/transport)

-40 °C - 70 °C

Ambient temperature (assembly)

-5 °C - 100 °C

Ambient temperature (operation)

-40 °C - 100 °C (dependent on the derating curve)

Connection capacity

Connection method

Solder/Slip-on connection

Pluggable

Yes

Conductor cross section solid

0.2 mm² - 2.5 mm²

Conductor cross section flexible

0.2 mm² - 2.5 mm²

Conductor cross section AWG / kcmil

24 - 12

Environmental Product Compliance

REACh SVHC

Lead 7439-92-1

China RoHS

Environmentally Friendly Use Period = 50 years

China RoHS

For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Environmental and durability tests (E)

Specification

IEC 61984:2008-10

Result, degree of protection, IP code

Finger safety with IP20 test finger

Electrical parameters

Nominal current

12 A

Nom. voltage

320 V

Rated voltage

320 V

Rated voltage (III/2)

320 V

Rated voltage (II/2)

630 V

Rated surge voltage (III/3)

4 kV

Rated surge voltage (III/2)

4 kV

Rated surge voltage (II/2)

4 kV

Termination and connection method

Test for conductor damage and slackening

IEC 60999-1:1999-11

Test for conductor damage and slackening

Test passed

Standards and Regulations

Connection in acc. with standard

EN-VDE

Connection in acc. with standard

CSA

Flammability rating according to UL 94

V2

Item properties

Brief article description

Feed-through header

Plug-in system

CLASSIC COMBICON

Type of contact

Male connector

Range of articles

DFK-MSTB 2,5/..-GF

Pitch

5.08 mm

Number of positions

5

Connection method

Solder/Slip-on connection

Mounting type

Direct mounting

Pin layout

Linear pinning

Locking

Threaded flange

Number of levels

1

Number of connections

5

Number of potentials

5

Modelos CAD

traceparts

Descargar