Phoenix Contact
1621831
AC charging cable 1621831
- Consigue plazos de pago de hasta 90 días de 500+ proveedores.
- Descuentos de reventa de hasta el 40%!
Enviar solicitud de precio
1
Formas de pago:
Oferta con plazo de entrega del fabricante
Entrega:Bajo pedido
El mejor precio:
Enviar solicitud de precio
Additional Information
- Part Number
- 1621831
- UPC
- 4046356986564
Product definition
- Product type
- AC charging cable with Vehicle Connector, open cable end, with protective cap
- Type
- D-Line
- Standards/regulations
- IEC 62196-2
- Charging standard
- Type 2
- Charging mode
- Mode 3, Case C
- Note
- NOTE: Signal transmission is dependent on the cable length and may be adversely affected.
- Note
- The cable capacity must therefore be assessed in the overall system of the charging station and must not exceed 3100 pF (IEC 61851-1, Annex A, Table A.2, Note d).
- Note
- Interference-free V2G communication in accordance with ISO 15118 is not guaranteed for cable lengths over 10 m (ISO IEC 15118-3, A.11.3, Table A.11).
- Note
- Cable management is required in certain regions if the cable length exceeds 5.0 m (Switzerland) or 7.5 m (USA) (IEC 61851-1).
Dimensions
- Vehicle connector width
- 60.00 mm
- Vehicle connector height
- 102.90 mm
- Vehicle connector depth
- 229.60 mm
- Conductor length
- 10 m
- Stripping length
- 45 mm ±10 mm
Electrical properties
- Maximum charging power
- 26.6 kW
- Number of phases
- 3
- Number of power contacts
- 5 (L1, L2, L3, N, PE)
- Rated current of power contacts
- 32 A
- Rated voltage for power contacts
- 480 V AC
- Number of signal contacts
- 2 (CP, PP)
- Rated current for signal contacts
- 2 A
- Rated voltage for signal contacts
- 30 V AC
- Type of signal transmission
- Pulse width modulation
- Note on the connection method
- Crimp connection, cannot be disconnected
- Resistor coding
- 220 Ω (between PE and PP)
Material
- Housing material
- Plastic
- Material handle area
- Soft plastic
- Material protective cap
- Soft plastic
- Material mating face
- Plastic
- Material surface of contacts
- Ag
Mechanical properties
- Insertion/withdrawal cycles
- > 10000
- Insertion force
- < 100 N
- Withdrawal force
- < 100 N
Ambient conditions
- Ambient temperature (operation)
- -30 °C - 50 °C
- Ambient temperature (storage/transport)
- -40 °C - 80 °C
- Max. altitude
- 5000 m (above sea level)
- Degree of protection
- IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
- Degree of protection
- IP44 (Protective cap)
Locking
- Locking type
- No locking option for U-lock
Environmental Product Compliance
- China RoHS
- Environmentally Friendly Use Period = 10;
- China RoHS
- For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Design
- Design line
- D-Line
- Housing color
- black
- Mating face color
- gray
- Color handle area
- gray
- Color protective cap
- black
- Label
- 14.1 mm x 44.8 mm (customer logo on request)
Cable
- Cable structure
- 5 x 6.0 mm² + 1 x 0.5 mm²
- Wiring standards/regulations
- prEN 50620 / DIN EN 50620
- Wiring class
- Class 5
- Wiring certifications
- VDE
- External cable diameter
- 17 mm ±0.4 mm
- Type of conductor
- straight
- Outer sheath, material
- TPE-U
- External sheath, color
- black
- Minimum bending radius
- 255 mm (15 x diameter)
Otras categorías
ActuadoresBloquesCables, tuberías y manguerasCompresoresControlAcoplamientos y AccesoriosCilindros y PistonesElectrónicaFiltrosHVACPCs industriales y HMIsIluminaciónTécnica linealMotoresFuente de alimentaciónTransmisión de energíaBombas y VálvulasEnergías renovablesRobóticaSellos, anillos y conectoresSensores y dispositivos de mediciónHerramientas y AccesoriosCNCOtros