- Product Certifications
- DNV || LROS (Lloyds register of shipping) || ABS || RMRoS || RINA || CB || BV || CSA || UL || UKCA
- Power Dissipation Per Pole
- 65 W AC-1 || 42 W AC-3
- Average Impedance
- 0.26 mOhm - Ith 500 A 50 Hz
- [Ith] Conventional Free Air Thermal Current
- 500 A 40 °C
- Control Circuit Voltage Limits
- operational 0.85...1.1 Uc 55 °C) || drop-out 0.2...0.35 Uc 55 °C)
- Standards
- JIS C8201-4-1 || EN 60947-1 || EN 60947-4-1 || IEC 60947-1 || IEC 60947-4-1
- Mounting Support
- plate
- Control Circuit Type
- DC standard
- Contactor Coil Voltage
- 48 V DC standard
- Hold-In Power Consumption In W
- 6-6 W 20 °C
- Rated Breaking Capacity
- 3200 A IEC 60947-4-1
- Power Range
- 110-220 kW 480-500 V 3 phase || 110-220 kW 380-440 V 3 phase || 110-220 kW 200-240 V 3 phase || 250-500 kW 480-500 V 3 phase
- Associated Fuse Rating
- 400 A aM <= 440 V || 500 A gG <= 440 V
- [Uimp] Rated Impulse Withstand Voltage
- 8 kV
- Connections - Terminals
- control circuit screw clamp terminals 1 1-4 mm²flexible without cable end || control circuit screw clamp terminals 2 1-4 mm²flexible without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit screw clamp terminals 2 1-2.5 mm²flexible with cable end || control circuit screw clamp terminals 1 1-4 mm²solid without cable end || control circuit screw clamp terminals 2 1-4 mm²solid without cable end || power circuit bar 2 30 x 5 mm || power circuit lugs-ring terminals 2 150-150 mm² || power circuit bolted connection
- Pole Contact Composition
- 3 NO
- Motor Starter Type
- direct on-line contactor
- Operating Time
- 50...60 ms closing || 45...60 ms opening
- Maximum Operating Rate
- 2400 cyc/h 55 °C
- Mechanical Durability
- 10 Mcycles
- Tightening Torque
- control circuit 1.2 N.m || power circuit 35 N.m
- Inrush Power In W
- 1000-1000 W 20 °C)
- Compatibility Code
- LC1F
- Overvoltage Category
- III
- Motor Power Kw
- 75 kW 400 V AC 50/60 Hz AC-4) || 200 kW 380...400 V AC 50/60 Hz AC-3) || 220 kW 415 V AC 50/60 Hz AC-3) || 250 kW 440 V AC 50/60 Hz AC-3) || 257 kW 500 V AC 50/60 Hz AC-3) || 280 kW 660...690 V AC 50/60 Hz AC-3) || 185 kW 1000 V AC 50/60 Hz AC-3) || 110 kW 220...230 V AC 50/60 Hz AC-3)
- [Ui] Rated Insulation Voltage
- 1000 V IEC 60947-4-1 || 1500 V VDE 0110 group C
- [Icw] Rated Short-Time Withstand Current
- 3600 A 40 °C - 10 s || 2400 A 40 °C - 30 s || 1700 A 40 °C - 1 min || 1200 A 40 °C - 3 min || 1000 A 40 °C - 10 min
- Heat Dissipation
- 6-6 W