- Circle Diameter Of The Mounting Holes
- 165 mm
- Peak Stall Torque
- 90.2 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Continuous Power
- 4100 W
- Shaft Diameter
- 24 mm
- Key Width
- 8 mm
- Nominal Output Power
- 1940 W 115 V single phase || 3330 W 230 V single phase || 4050 W 400 V three phase || 3430 W 480 V three phase
- Maximum Mechanical Speed
- 4000 rpm
- Mounting Holes Diameter
- 11 mm
- Type Of Cooling
- natural convection
- Maximum Radial Force Fr
- 2420 N 1000 rpm || 1920 N 2000 rpm || 1670 N 3000 rpm
- Encoder Type
- absolute single turn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 17.94 kg.cm²
- Number Of Motor Poles
- 5
- Back Emf Constant
- 105 V/krpm 20 °C
- Maximum Axial Force Fa
- 300 N
- Ip Degree Of Protection
- shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End
- parallel key
- Centring Collar Depth
- 3.5 mm
- Nominal Speed
- 750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
- Electrical Connection
- rotatable right angled connector
- Holding Brake
- without
- Speed Feedback Resolution
- 128 periods
- Stator Resistance
- 0.4 Ohm
- Continuous Stall Current
- 17.6 A
- Nominal Torque
- 24.7 N.m 115 V single phase || 21.2 N.m 230 V single phase || 12.9 N.m 400 V three phase || 9.1 N.m 480 V three phase
- Shaft Length
- 50 mm
- Phase
- three phase
- Length
- 327.5 mm
- Net Weight
- 21.3 kg
- Maximum Current Irms
- 61 A
- Torque Constant
- 1.58 N.m/A 120 °C
- Centring Collar Diameter
- 130 mm
- Continuous Stall Torque
- 27.8 N.m 115...480 V three phase
- Stator Inductance
- 7.72 mH
- Motor Flange Size
- 140 mm
- [Us] Rated Supply Voltage
- 115...480 V