Wago

280-889

1 / 3
thumbnail
thumbnail
thumbnail
Part Number
280-889
Tariff Code
85369010000
UPC
4044918539081
ETIM
Group Code : EG000012
Group Description : Terminal blocks
Class Description : Feed-through terminal block
Class Code : EC000897
Version : 7
Métodos de pago:
Mejor oferta de:
BGProveedor de confianza de Automa.Net
Disponibilidad:
50 piezas
En stock
Actualizado en: 31-10-2024
Garantía:
12 meses
Entrega Estimada:
Bajo pedido
Condición:
Nuevo Precintado de Fábrica
Nuevo Precintado de Fábrica - Un artículo completamente nuevo, sin usar, sin abrir, sin daños, en su embalaje original sellado por el fabricante.
Información de envío
Proceso de Pago Seguro
Políticas de Devolución y Reembolso
Políticas de Envío
Políticas de Garantía

Ratings Per Iec/En

Ratings per
IEC/EN 60947-7-1
Nominal voltage (III/3)
400 V
Rated impulse voltage (III/3)
6 kV
Rated current
20 A
Legend (ratings)
(III / 3) ≙ Overvoltage category III / Pollution degree 3

Environmental Requirements

Processing temperature
-35 … +85 °C
Continuous operating temperature
-60 … +105 °C

Physical Data

Width
5 mm / 0.197 inches
Height
113 mm / 4.449 inches
Depth from upper-edge of DIN-rail
49.5 mm / 1.949 inches

Material Data

Note (material data)
<a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
Color
Gray/gray/gray
Material group
I
Insulation material
Polyamide (PA66)
Flammability class per UL94
V0
Fire load
0.335 MJ
Weight
18.400 g

Mechanical Data

Design
Horizontal type
Mounting type
DIN-35 rail
Marking level
Without marking level

Specifications

Product Group Code
0001

Commercial Data

Packaging type
Box
Country of origin
DE
GTIN
4044918539081
Customs tariff number
85369010000

Power Loss

Power loss, per pole (potential)
0.532 W
Rated current IN for specified power loss
20 A
Resistance value for specified, current-dependent power loss
0.00133 Ω

Connection 1

Connection technology
CAGE CLAMP®
Actuation type
Operating tool
Connectable conductor materials
Copper || Aluminum
Connectable conductor materials (note)
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
Solid conductor
0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor
0.08 … 2.5 mm² / 28 … 12 AWG
Note (conductor cross-section)
12 AWG: THHN, THWN
Strip length
8 … 9 mm / 0.31 … 0.35 inches
Wiring direction
Front-entry wiring

Productos relacionados