Wago
883-2401
2-conductor through terminal block; 240 mm²; with screw-type connection; 240,00 mm²; gray
- Consigue plazos de pago de hasta 90 días de 500+ proveedores.
- Descuentos de reventa de hasta el 40%!
Enviar solicitud de precio
1
Formas de pago:
Condiciones del producto:
Oferta con plazo de entrega del fabricante
Entrega:Bajo pedido
El mejor precio:
€16.84
Additional Information
- Part Number
- 883-2401
- UPC
- 4055143940641
- Tariff Code
- 85369010000
- ETIM
- Group Code : EG000012
- Group Description : Terminal blocks
- Class Description : Feed-through terminal block
- Class Code : EC000897
- Version : 7
Ratings Per Iec/En
- Ratings per
- IEC/EN 60947-7-1
- Nominal voltage (III/3)
- 1000 V
- Rated impulse voltage (III/3)
- 8 kV
- Rated current
- 380 A
- Legend (ratings)
- (III / 3) ≙ Overvoltage category III / Pollution degree 3
Environmental Requirements
- Continuous operating temperature
- -35 … +105 °C
Physical Data
- Width
- 36 mm / 1.417 inches
- Height
- 93 mm / 3.661 inches
- Depth from upper-edge of DIN-rail
- 126.3 mm / 4.972 inches
Material Data
- Note (material data)
- Information on material data can be found here
- Color
- Gray
- Insulation material
- Polyamide (PA66)
- Flammability class per UL94
- V2
- Fire load
- 0.000 MJ
- Weight
- 352.400 g
Mechanical Data
- Tightening torque
- 10 … 20 Nm
- Mounting type
- DIN-35/32 rail
- Marking level
- Side marking
Specifications
- Product Group Code
- 0001
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4055143940641
- Customs tariff number
- 85369010000
Ratings Per Csa
- Approvals per
- CSA 22.2 No 158
- Rated voltage CSA (Use Group C)
- 600 V
- Rated current CSA (Use Group C)
- 370 A
Power Loss
- Power loss, per pole (potential)
- 11.552 W
- Rated current IN for specified power loss
- 380 A
- Resistance value for specified, current-dependent power loss
- 8e-005 Ω
Connection 1
- Connection technology
- Screw connection
- Actuation type
- T-wrench; 8 mm
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsBoth restrictions and application notes must be observed when terminating aluminum conductors.These instructions can be found in the WAGO Webshop under “Downloads – Documentation – Additional Information: Terminating Aluminum Conductors”.
- Nominal cross-section
- 240 mm²
- Solid conductor
- 70 … 240 mm² / 2/0 AWG … 500 kcmil
- Stranded conductor
- 70 … 240 mm² / 2/0 AWG … 500 kcmil
- Fine-stranded conductor
- 70 … 240 mm² / 2/0 AWG … 500 kcmil
- Fine-stranded conductor; with insulated ferrule
- 70 … 185 mm² / 2/0 AWG … 350 kcmil
- Strip length
- 38 mm / 1.5 inches
- Wiring direction
- Side-entry wiring
- Screw thread
- M10
Ratings Per Ul 1059
- Approvals per
- UL 1059
- Rated voltage UL (Use Group B)
- 600 V
- Rated current UL (Use Group B)
- 370 A
- Rated voltage UL (Use Group C)
- 600 V
- Rated current UL (Use Group C)
- 370 A